> > > The Apple removable module is actually only 8 megs, with the other 8
> > > megs soldered on the motherboard.  I have a theory that if you take
> > > off the apple 8 meg card, everything else will work.  Sometimes
> > > having 3 RAM modules makes for a finnicky PB1400.

> > And you were right, along with John McGibney and the others who suggested
> > this. It now comes up with 56MB. This is a 1400cs/117 if that makes any
> > difference -- does this problem seem to be more common with older 1400s?

> Im not sure if is the apple card or one of the other cards.  I also 
> dont know if it matters if its the older version of the 1400 or the 
> newer one. Sometimes having 3 modules is trouble.  Try adding the 4 
> meg apple card back in and see if you can get to 60 megs.

This, also, worked. It would appear, then, that the problem was the 8MB
"Apple module" that I installed in there -- I guess the /117 only will work
with its original 4MB module?

Again, many thanks.

-- 
----------------------------- personal page: http://www.armory.com/~spectre/ --
 Cameron Kaiser, Point Loma Nazarene University * [EMAIL PROTECTED]
-- The whippings shall continue until morale improves. ------------------------

-- 
PowerBooks is sponsored by <http://lowendmac.com/> and...

  Small Dog Electronics    http://www.smalldog.com   | Enter To Win A |
  -- Canon PowerShot Digital Cameras start at $299   |  Free iBook!   |

 RoadTools $30 PodiumPad available at Apple retail stores, $20 Traveler 
 CoolPad at Staples. Both in white for iBooks at <http://roadtools.com>.

      Support Low End Mac <http://lowendmac.com/lists/support.html>

PowerBooks list info:   <http://lowendmac.com/lists/powerbooks.shtml>
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to