Browns Ferry has been doing this for several years now
IF so... Does your station use a tool monitor / SAM as part of the survey process? IF so... What set point is used for the tool monitor / SAM? 5000 cpm Are surveys performed by RP Technicians or tool room craft? Tool room attendants. When they alarm they are segregated an RP surveys. The craft returns tools to a bin. Bags Contaminated tools go to small tool decon and are not brought to their bin or unbagged by the tool room attendant if any show up. IF RP Technicians... Is this task routinely assigned or by request? We have a daily routine survey where RP technicians will survey the rejected tools of the tool room SAM Are unsurveyed tools ever available for craft use or segregated until surveyed? No Chuck Creamer Charles E. Creamer Health Physicist Tennessee Valley Authority Browns Ferry Nuclear Plant P.O. Box 2000 (Mail Stop NAB-1G-BFN) Decatur, Al. 35609-2000 Phone: 256-729-2983 Fax: 256-729-3101 Pager: 1-800-323-4853, pin 30-053 mailto:[email protected] <mailto:[email protected]> Expect EXCELLENCE! Accept nothing less! This electronic message transmission contains information which may be TVA SENSITIVE, TVA RESTRICTED or TVA CONFIDENTIAL. Any misuse or unauthorized disclosure can result in both civil and criminal penalties. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the content of this information is prohibited. If you have received this communication in error, please notify me immediately by email and delete the original message. From: [email protected] [mailto:[email protected]] On Behalf Of Barnby, Monica Sent: Tuesday, April 09, 2013 6:49 PM To: [email protected] Cc: Sutton, Craig Subject: Powernet: Hot Tool Crib SAM Survey All, At DCPP, we are implementing a new process - putting a SAM in our hot tool crib. Answers to the questions below will be much appreciated. Please reply all. Craig is not a member yet. Thanks, Monica Barnby PG&E DCPP Health Physicist 805 545 3566 From: Sutton, Craig Sent: Tuesday, April 09, 2013 4:40 PM To: Barnby, Monica Subject: Powernet questions Does your station survey all tools returned to the RCA tool room / tool crib for contamination? IF so... Does your station use a tool monitor / SAM as part of the survey process? IF so... What set point is used for the tool monitor / SAM? Are surveys performed by RP Technicians or tool room craft? IF RP Technicians... Is this task routinely assigned or by request? Are unsurveyed tools ever available for craft use or segregated until surveyed? Respectfully, Craig D. Sutton Radioactive Materials Engineer Pacific Gas & Electric Company Diablo Canyon Power Plant MS 104/2/216 PO Box 56 Avila Beach, CA 93424 P: 805.545.4208 | C: 805.748.0603 | [email protected] ________________________________ PG&E is committed to protecting our customers' privacy. To learn more, please visit http://www.pge.com/about/company/privacy/customer/ ________________________________
