North Anna's reply is listed below.
Barbara J. Thompson North Anna Power Station 1022 Haley Drive Mineral, Va 23117 Nuclear Specialist Email: [email protected]<mailto:[email protected]> Phone: 540-894-2638 From: Sutton, Craig Sent: Tuesday, April 09, 2013 4:40 PM To: Barnby, Monica Subject: Powernet questions Does your station survey all tools returned to the RCA tool room / tool crib for contamination? Yes. IF so... Does your station use a tool monitor / SAM as part of the survey process? Yes. IF so... What set point is used for the tool monitor / SAM? 50,0000 dpm Are surveys performed by RP Technicians or tool room craft? Normally Tool Room attendants. IF RP Technicians... Is this task routinely assigned or by request? We perform periodic surveys of the RCA Tool Room for both loose and fixed contamination. Are unsurveyed tools ever available for craft use or segregated until surveyed? No, we have a locked drop box that prevents a worker from obtaining an un-surveyed tool. Respectfully, Craig D. Sutton Radioactive Materials Engineer Pacific Gas & Electric Company Diablo Canyon Power Plant MS 104/2/216 PO Box 56 Avila Beach, CA 93424 P: 805.545.4208 | C: 805.748.0603 | [email protected]<mailto:[email protected]> ________________________________ PG&E is committed to protecting our customers' privacy. To learn more, please visit http://www.pge.com/about/company/privacy/customer/ ________________________________ CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and/or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.
