Re: [PRODIG] Imacon PIII installation - Windows XP

[Fernando Chaves]

The ASPI layer, is it installed? ----- Original Message ----- From: Gordon C Harrison To: [EMAIL PROTECTED] Sent: Wednesday, October 15, 2003 6:30 PM Subject: [PRODIG] Imacon PIII installation - Windows XP Dear List,   I am trying to install my Imacon PIII on my XP system and seem to be failing at the first hurdle. My system was upgraded with a SCSI board , and the only SCSI device connected to the PC is the scanner. The cable connecting the scanner/PC is a SCSI II cable, and address 3 is set on the scanner.   After switching on the scanner the PC is booted, but always fails to boot properly, and stalls at the point where the XP logo page is displayed. Just prior to that a message is displayed saying that Windows has encountered a problem, and gives me some options to proceed, none of which have the desired effect.  I also tried setting address two on the scanner, with the same results.   If I disconnect the scanner the PC boots as normal.   Has anyone any ideas about a way forward from here? Gordon C Harrison Landscapes For Every Mood Ltd http://www.gordon-c-harrison.co.uk T 01445 731557