Gordon C Harrison on Wednesday, October 15 wrote >I am trying to install my Imacon PIII on my XP system and seem to >be failing at the first hurdle. My system was upgraded with a SCSI >board , and the only SCSI device connected to the PC is the >scanner. After switching on the scanner the PC is booted, but always >fails to boot properly, and stalls at the point where the XP logo >page is displayed.
>Fernando Chaves replied >The ASPI layer, is it installed? >Brian wrote >Sounds like a missing ASPI layer - you can download the software from >http://www.adaptec.com/worldwide/support/suppdetail.html?prodkey=ASPI-4.70 >It's easy to install. >Brian Thanks Brian and Fernando, I downloaded the ASPI layer and installed it without difficulty, but it has made no change to XP boot problem. The documentation at the adaptec download site said it is preferable to get a device specific ASPI layer from the peripheral manufacturer, I'll check that out at the Imacon site. =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
