> >Gordon C Harrison wrote: > >> I am trying to install my Imacon PIII on my XP system and seem >> to be failing at the first hurdle. My system was upgraded with a SCSI >> board, and the only SCSI device connected to the PC is the scanner. >> The cable connecting the scanner/PC is a SCSI II cable, and address 3 >> is set on the scanner. >>
Thomas Holm wrote > >Try changing the SCSI address and see if it helps matters. I don't know >about PC's but on mac SCSI 3 is taken by the system. > Thanks Thomas, The hardware spec that came with the scanner mentions that addresses 7-9 should not be used. I will check all the other available addresses. Many thanks Gordon =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
