>Gordon C Harrison wrote: > >>I am trying to install my Imacon PIII on my XP system and seem >>to be failing at the first hurdle. My system was upgraded with a SCSI >>board, and the only SCSI device connected to the PC is the scanner. >>The cable connecting the scanner/PC is a SCSI II cable, and address 3 >>is set on the scanner. After switching on the scanner the PC is >>booted, but always fails to boot properly, and stalls at the point >>where the XP logo page is displayed.
>Thomas Holm wrote >Try changing the SCSI address and see if it helps matters. I don't know >about PC's but on mac SCSI 3 is taken by the system. > Thanks Thomas, I went through all the available addresses from 0 to 6 without any joy. Addresses 7,8,and 9 are not to be used according to the Imacon documentation. Gordon C Harrison Landscapes For Every Mood Ltd http://www.gordon-c-harrison.co.uk T 01445 731557 =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
