Hi Mike Perhaps you just did a quick read through? The ECI_Offest_2004 download includes 4 press profiles and relevant pdf files.
mouseinthehouse-at-waitrose.com (Mike Russell)::21/10/04::2:52 pm:: GMT+0100 >At 11:56 pm +0100 20/10/04, Neil Barstow wrote: >>These ECI profiles are made from the FOGRA datasets. These were >>obtained by experts from various presses set up to optimum repeatable >>performance as in ISO 12647-2. Thus, the ECI profiles can often provide >>a much better characterisation than Euroscale Coated which is: >> >>1: too high an ink limit for many processes > >I just took a look at this profile (from >ECI_Offset_2004.zip) and the info file shows it >as having a "Total Dot Area" (is that the same as >Total Ink?) of 350. If so it's surely no better >than Euroscale Coated as a default, bearing in >mind the original poster's issue: have a look at ISOwebcoated.icc about ISOwebcoated.icc: << The ECI offset profile ISOwebcoated.icc is based on the offset characterization table âFOGRA28L.txtâ valid for the following reference printing conditions relating to the international standard ISO/DIS 12647-2:2003+: Commercial and specialty offset, paper type 3, low weight coated web offset, 60 g/m2, positive plates, screen frequency 60/cm (150 lpi), white backing (wb). The profile was generated using Heidelberg Printopen 4.0.5.2 with the following settings: Black length 9 Black width 5 Total dot area 300% Maximum Black 100 % >> Best Regards Neil Barstow Consulting in Imaging & Colour Management http://www.colourmanagement.net/ http://www.apple.com/uk/creative/neilbarstow/ =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
