I have read in a few  places where they don't always recommend putting a master 
compressor on the master track, since the master track unlike all the other 
tracks in pro tools has the fader before the inserts and sends, which means if 
u put a compressor on the master track, set it up how u like, then later adjust 
the master fader, it will pretty much cause you to have to go redo the 
compressor settings. A work around is to create a sub mimix aux track and send 
all your tracks to that, add all your master effects on that track and output 
that to the master track.

On Oct 16, 2011, at 9:54 AM, Slau Halatyn wrote:

> Christopher,
> 
> Master tracks control the output level being fed to an output bus. Most 
> often, a master track will control the main left and right outputs for a 
> stereo mix. It's not necessary to necessarily use a master track for a 
> regular mix but it certainly does help to create a master track to see the 
> combined level of all of the individual tracks on the master track's level 
> meter. Further, when putting bus compression over an entire mix, it would 
> normally be done with a compressor plug-in on a master track. Finally, master 
> tracks are used when creating stems for surround mixes, alternate mixes, 
> instrumental versions, etc. Again, most people just use a single master track 
> for overall mix purposes.
> 
> HTH,
> 
> Slau
> 
> 

Reply via email to