No worries, I didn't take it that way at all. It's definitely an aspect of using the master track that one should consider. At this point, I think the issue of pre versus post fader compression is beyond the question when someone is just trying to get their head around Pro Tools in general, that'sl all.
Cheers, Slau On Oct 16, 2011, at 11:03 AM, Stephen Martin wrote: > I do agree with you, and i do apologize if i came off as trying to correct > you or saying you shouldn't put a compressor on the master track. It was > intended more as a suggestion or tip that i came across in my own journey in > learning more about PT, and figured i'd would share another way of doing it > with the list. > On Oct 16, 2011, at 10:49 AM, Slau Halatyn wrote: > >> As with most things, there's more than one way to accomplish a task and this >> is one of them. Some people put compressors on the master track, some don't. >> I'm simply illustrating one of its uses. >> >> Slau >> >> On Oct 16, 2011, at 10:02 AM, Stephen Martin wrote: >> >>> I have read in a few places where they don't always recommend putting a >>> master compressor on the master track, since the master track unlike all >>> the other tracks in pro tools has the fader before the inserts and sends, >>> which means if u put a compressor on the master track, set it up how u >>> like, then later adjust the master fader, it will pretty much cause you to >>> have to go redo the compressor settings. A work around is to create a sub >>> mimix aux track and send all your tracks to that, add all your master >>> effects on that track and output that to the master track. >>> >>> On Oct 16, 2011, at 9:54 AM, Slau Halatyn wrote: >>> >>>> Christopher, >>>> >>>> Master tracks control the output level being fed to an output bus. Most >>>> often, a master track will control the main left and right outputs for a >>>> stereo mix. It's not necessary to necessarily use a master track for a >>>> regular mix but it certainly does help to create a master track to see the >>>> combined level of all of the individual tracks on the master track's level >>>> meter. Further, when putting bus compression over an entire mix, it would >>>> normally be done with a compressor plug-in on a master track. Finally, >>>> master tracks are used when creating stems for surround mixes, alternate >>>> mixes, instrumental versions, etc. Again, most people just use a single >>>> master track for overall mix purposes. >>>> >>>> HTH, >>>> >>>> Slau >>>> >>>> >>> >> >
