Sounds kind of like my Mackie Onyx board. I have both the Onyx, 003 and a 002 
sitting around, but I am still contemplating getting something else if I could 
justify it. The thing with the 003 is that even though it is rock solid on PT, 
it doesn't seem to be as user friendly on other daws, the problem with the onyx 
is that it is not considered a full surface,. 

-----Original Message-----
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of 
TheOreoMonster
Sent: Monday, February 01, 2016 8:07 PM
To: ptaccess@googlegroups.com
Subject: Re: Digi 003

It’s A&H so the are known for their mic press and the 4 band eq on th board. 
The  converters seemed very nice in my experience.  Unlike the Studio live from 
presounus its an analog mixer with the audio not going digital till it hits the 
Firewire bus. The StudioLive is digital so it gets converted to digit as soon 
as the signal hits the mic press. 
 some 
> On Feb 1, 2016, at 11:54 PM, Poppa Bear <heavens4r...@gmail.com> wrote:
> 
> What did that Allen and Heath run you? How are the built in pre's and the 
> conversion? 
> Thanks
> 
> -----Original Message-----
> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf 
> Of TheOreoMonster
> Sent: Monday, February 01, 2016 7:04 PM
> To: ptaccess@googlegroups.com
> Subject: Re: Digi 003
> 
> This is why i ended up going with the Allen & Heath Zed R16 mixer over the   
> Presounus. Its a mixer, interface and control surface all none. No motorized 
> faders but soft take over so things don’t just  jump when you start moving 
> faders.. 
> 
> 
>> On Jan 31, 2016, at 9:20 AM, Ricky Prevatte <rickypreva...@gmail.com> wrote:
>> 
>> I will try and work it out it is going to be a big opportunity to adapt and 
>> change everything. Presonus Mike pres are wonderful but no automation, no 
>> control surface overall and no plug in work. I will have to adapt I can 
>> always use the mixer for live application and work out a way to expand the 
>> studio when I track a bigger band.
>> 
>> Ricky Prevatte LMBT1154
>> 
>>> On Jan 30, 2016, at 2:28 PM, Poppa Bear <heavens4r...@gmail.com> wrote:
>>> 
>>> I hope you can get it soarted out. I really enjoy mine. The pre's and the 
>>> conversion aren’t to die for, but the SPDIF can solve any of those issues. 
>>> They are typically a rock solid peace IMO and I haven't really came across 
>>> anything over the last 4 or 5 years that is under 3 grand that I would 
>>> trade up for and even then I would have to justify a larger surface with 
>>> what my clients actually need. 
>>> 
>>> -----Original Message-----
>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On 
>>> Behalf Of Ricky Prevatte
>>> Sent: Saturday, January 30, 2016 5:11 AM
>>> To: ptaccess@googlegroups.com
>>> Subject: Digi 003
>>> 
>>> Well got me a new preowned Digi003.  I am having problems getting it 
>>> installed in protools 11.4  and logic pro x.  I think there is a conflict 
>>> with my presonus mixer drivers.     so does any one know if the digi 
>>> and the presonus studio live mixer are going to stay in constant conflict.  
>>> What I am asking is do all presonus drivers need to be uninstalled for the 
>>> digi  to run?  I know they will not work in tandom.  I need to know so I 
>>> can make a judgementcall as to keep the digi  or send it back.
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to