That's a serious limitation and, I'd say, a deal breaker. The behavior I described is the way it works on the 003 so I figured it would be the same on the MCU. Too bad.
Slau On Feb 5, 2016, at 5:03 PM, mcdiemert . <mcdiem...@gmail.com> wrote: > For anyone following this thread as it pertains to fader flip on the > MCU Pro from Mackie, below is the response I received from Mackie > support, and unfortunately confirms the limitations I've suspected > while using this surface. > > Hi Matthew, > > > > Thanks for writing! > > > > Unfortunately with using the HUI mode on the MCU Pro for Pro Tools > does not have a flip to fader feature. Now if you are using Logic, > Tracktion, Cubase or other DAWs that use either Mackie Control or > Logic Control you will be able to use the flip to fader feature. > Unfortunately there are more functionality limitations with HUI > because Avid has not updated the protocol communication between the > MCU and Pro Tools. Avid hasn’t really done any updates to HUI > implementation since Avid has their own control surfaces that use the > EUCON protocol. > > > > Let us know if you have any questions. > > > > All the best, > > > > Technical Support > > > On 2/4/16, Ricky Prevatte <rickypreva...@gmail.com> wrote: >> I was wrong Kevin it is not fadeer flip. He was making parameter changes >> with the V pot on the control surface. >> >> Ricky Prevatte LMBT1154 >> >>> On Feb 3, 2016, at 11:14 AM, Kevin Reeves <reeves...@gmail.com> wrote: >>> >>> hi Ricky. >>> >>> On this issue of Fader Flip. Could you possibly locate that video you >>> found on youtube, or tell me what the title of it might have been so I can >>> dig it up? I'm talking with Matt off list and I >>> want to try and get this sorted for all of us. >>> >>> Thanks so m,uch. >>> >>> Kevin >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > > -- > Warm Regards: > Matt Diemert > 330-980-0046 > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
