Hi Thierry, The Q60 / Q40 clock chip is a ST M48T02-150PC1 Timekeeper battery. It plugs into a 24 pin socket on the Q60 board.
It is still available, if you need a new one I will source some. Regards Derek -----Original Message----- From: "Thierry Godefroy" <ql.us...@free.fr> Sent: 11/03/2016 13:41 To: "ql-us...@q-v-d.com" <ql-us...@q-v-d.com> Subject: Re: [Ql-Users] SMSQE 3.24 On Wed, 9 Mar 2016 17:39:25 +0100, I wrote: > There's something fishy with v3.24: once compiled for the Q40/Q60, when > trying to configure SMSQ with MenuConfig, the "Initial display mode" value > does not show and it is impossible to configure it. When booting with the > resulting SMSQ/E binary, I find mywelf with mode 4 consoles displayed in > mode 8 colours... This problem was (apparently) due to the lack of poper system date setting before starting the build process (my Q60 RTC's battery is alas dead, and given it's a built-in battery inside the RTC package itself, it can't be replaced); I retried today (after checking with Wolf that I did have the proper sources, which was indeed the case), this time after a proper SDATE, and the resulting binary works fine. Thierry. _______________________________________________ QL-Users Mailing List _______________________________________________ QL-Users Mailing List