So here's my latest stupid idea. The floor under the seats flexes with a pop-pop kind of noise. This usually happens with a passenger in the car and under acceleration.
The Q boys do a retro fix of the strengthening sections fitted to the later chassis. Do you think that if I replaced the 3/4" spacers under the seat frame with lenghts of aluminium (for weight saving) that run from the wall at the back to the strengthening crossmember and popped a couple of extra bolts in - that it would stop the flex? Do you think square section 3/4" ally would be strong enough - or would solid bar be better. Or am I just rambling... Ian --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
