Thanks Nigel, I was trying to avoid the welding part as I do not have access to a friendly tig welder
Ian On Nov 13, 9:43 am, nigelp <[EMAIL PROTECTED]> wrote: > Hi Ian > Just had a quick look at mine to get my bearings!! > > It would help, it may even make the seats easier to fit rather than > fiddling about with those spacers. However whilst the alum is > lighter, my inclination would be to use stainless, per the floor and > weld it at the front and back ends, with a couple of tack welds along > the length. The other option is to use the triangular top hat per > Quantum and continue using the spacers, this option would be lighter > than the stainless box. If Q would sell you the top hat as a kit, you > could get it welded locally. > > Nigel --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
