I have full length housing for my Paul Klamper disc brakes and Dura Ace bar end shifters with full length housing. The included JagWire cables had too much drag in the housing to enable the Klampers to fully open no matter how I routed the housing. I put in some MEC-branded teflon cables (Canadian equivalent to REI) and presto, perfect brakes and shifting.
On Tue, Jun 21, 2016 at 2:26 PM, Joe Bernard <joerem...@gmail.com> wrote: > Rene may be onto something with the 9-speed bar-end and long/finicky cable > routing. I had the same problem on my Bike Friday and couldn't adjust it > out, either. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/p4Ne75v5T7s/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at https://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
