Wow, thank you all for the overwhelming response and for sharing your experience. I love the photos, keep 'em coming!
Matt, thanks for the detail on the Tektros, I ordered a pair but also decided to pull the trigger on Alex' Mafacs (thanks Alex!) to try out the conversion. Here is what I'll try: 1) New 700C RH tires - Bon Jon Pass in standard casings 2) Swap out Paul Racers Medium for MAFAC RAID and install 650b Wheels with Loup Loup Pass tires or with Hetres (650x42) depending on what fits I'm not sure when, but I will get to it... I have too many half baked projects at the moment, including my half-built Gallop on the stand right now, a brakeless Wilbury that will lose its wheels soon and a MMM bubbe with an Xtracycle that also needs a 650b conversion - I hope I can use the Paul Racers directly on the canti posts, I'm not sure if the plate where the bolt sits is removable. Thanks again to everyone and I'll report back. Max On Wednesday, October 25, 2023 at 1:33:13 PM UTC-4 ber...@bernardduhon.com wrote: > Careful with offset brake pad’s > If tires are wide pad my rub on tire > > > > > Get Outlook for iOS <https://aka.ms/o0ukef> > ------------------------------ > *From:* rbw-owne...@googlegroups.com <rbw-owne...@googlegroups.com> on > behalf of Toshi Takeuchi <tto...@gmail.com> > *Sent:* Wednesday, October 25, 2023 12:02:58 PM > *To:* rbw-owne...@googlegroups.com <rbw-owne...@googlegroups.com> > *Subject:* Re: [RBW] Considering trading my Ram for a Lightning Bolt > > I concur with Evan. I had a 54 cm 650b Ram with 54 mm Hetre/Baby Shoe > Pass tires and SKS fenders. It was as good as my custom bike, except for > the toe overlap and dynamo wiring. I used thin profile V-brake style pads > to get a little extra reach with the Tektro R559. That strategy may be > able to be combined with the offset brake-pad holders if needed. > > Toshi > > > On Sun, Oct 22, 2023 at 9:16 AM Evan E. <evanel...@gmail.com> wrote: > > Hi Alex, > > Here for your reference is a photo of my Rambouillet with 650b wheels, > Tektro R559 brakes, and Pari-Moto 650b x 42 tires. I used offset brake-pad > holders on the rear caliper to get a tad more reach. If it turns out you > need a bit more reach on your bike, let me know. I still have those offset > brake-pad holders. > > Evan > San Francisco > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bun...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/f9769df2-3b01-4616-8036-b25209c1009an%40googlegroups.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/f9769df2-3b01-4616-8036-b25209c1009an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bun...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/CAGB59xxyAHSM%2BbuB%3DeKo84iqT%3DUUKSG2J42OQ7HvewE7Ck0k2A%40mail.gmail.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/CAGB59xxyAHSM%2BbuB%3DeKo84iqT%3DUUKSG2J42OQ7HvewE7Ck0k2A%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/17175514-50a4-4e15-8837-22ec4f3cc38cn%40googlegroups.com.