Jay, 

Is there cell? If so use a cradlepoint. I do this with combox and
it is very reliable. A bit slow but I can change anything in the system. I
have not tried it with Outback 
Dave Angelini Offgrid Solar
"we go where
powerlines don't"
http://members.sti.net/offgridsolar/ [1]
e-mail
offgridso...@sti.net [2]
text 209 813 0060

On Fri, 16 Nov 2018 19:39:26
-0800, Jay  wrote:    Hi william   Very tech fix with the relay!  
Fortunately or unfortunately there is no reliable web at the location but
someone who manually checks things.    Yes the 3s still has some of the
same problems    Thx Jay Peltz power.      
On Nov 16, 2018, at 2:14 PM,
William Miller  wrote:

Jay: 

I have problems with all of my Mate3 and 3s
controllers locking up. So much so that I have implemented the following
steps: 

1. For most installations I leave the hub wire cover off and label
the Mate lead. Clients are instructed to unplug and re-plug the Cat5 lead
whenever the Mate locks up. 

2. On one installation I have a Control By
Web unit ping both Mate3 units every 5 minutes. If either fails to respond
after 3 attempts, a relay opens and closes the Orange/white leads which
power cycles the Mates.  

Locking up of Mates is a fact of life with
Outback equipment. I love the equipment and I hate the equipment. 

William


Lic 773985
millersolar.com [4]
805-438-5600  

FROM: RE-wrenches
[mailto:re-wrenches-boun...@lists.re-wrenches.org [5]] ON BEHALF OF Lones
Tuss
SENT: Friday, November 16, 2018 12:42 PM
TO: RE-wrenches
SUBJECT: Re:
[RE-wrenches] mate 3s locking   

Hello All 

And 

Hello Jay 

I just
asked the tech support boss on this as I had no idea. 

He has a test setup
that allows him to switch individuals lines on the cat5 cables. 

We can
duplicate Jay's screen shot below by opening the some of the lines to the
cat 5 cable. 

So as a start try replacing the cat5 between the Mate3S and
the Hub. 

Using the silicone grease that comes with a Mate is never a bad
idea. 

If your customer does not have a cable on hand I would try removing
the cable several times perhaps that could help to dislodge any corrosion
or dust on the connections. 

I hope this helps. 

Take Care All


-----Original Message----- 

From: RE-wrenches  On Behalf Of jay 

Sent:
Friday, November 16, 2018 8:05 AM 

To: RE-wrenches  

Subject:
[RE-wrenches] mate 3s locking 

** [EXTERNAL EMAIL] - Please report any
suspicious attachments, links, or requests for sensitive information to the
Help Desk. ** ________________________________ 

HI All, 

I'm wondering if
anyone else is having mate 3s locking up problems? 

I've got 2 systems
that have had this happen. 

One is a big system ( 2 radians and 5 CC). Of
course its a long ways away and no there isn't internet so no OpticsRE.


Its been reprogramed with latest REV firmware. No change. 

thx 

jay


peltz power 

_______________________________________________ 

List
sponsored by Redwood Alliance 

List Address:
RE-wrenches@lists.re-wrenches.org [8] 

Change listserver email address &
settings:


http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [9]


List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
[10] 

List rules  border-left:#1010ff 2px solid; margin-left:5px;
width:100%"> _______________________________________________
List sponsored
by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org
[13]

Change listserver email address &
settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
[14]

List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
[15]

List rules & etiquette:
www.re-wrenches.org/etiquette.htm [16]

Check
out or update participant bios:
www.members.re-wrenches.org [17]
   -- 




Links:
------
[1] http://members.sti.net/offgridsolar/
[2]
mailto:offgridso...@sti.net
[3] mailto:will...@millersolar.com
[4]
http://www.millersolar.com/
[5]
mailto:re-wrenches-boun...@lists.re-wrenches.org
[6]
mailto:re-wrenches-boun...@lists.re-wrenches.org
[7]
mailto:re-wrenches@lists.re-wrenches.org
[8]
mailto:RE-wrenches@lists.re-wrenches.org
[9]
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
[10]
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
[11]
http://www.re-wrenches.org/etiquette.htm
[12]
http://www.members.re-wrenches.org
[13]
mailto:RE-wrenches@lists.re-wrenches.org
[14]
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
[15]
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
[16]
http://www.re-wrenches.org/etiquette.htm
[17]
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to