Yes to both of your questions. I am feeling a lot better about this now.
On 9/5/2019 11:11 AM, Dave Angelini Offgrid Solar wrote:
Thanks Chris for the follow up. These were HZLA'a right? Kyle and his Dad
Jeff are great for Wattsun Support! These units have the manual track mode
also, right?
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridso...@sti.net
text 209 813 0060
On Thu, 5 Sep 2019 07:52:11 -0400, Christopher Warfel
<cwar...@entech-engineering.com> wrote:
I wanted to follow up on the issue I had previously posted.
We installed two ArrayTech trackers at different sites in the
unconventional east-west orientation. One worked well and one operated
so that it was not facing south very often. Kyle was able to guide me
through some troubleshooting and it appears the problem is fixed.
The tracker that worked properly had the sensor on the west end of the
array and was pointed east. The tracker not working as expected had the
sensor on the east end of the array and was pointed west. We swapped
the east/west sensor wires in the controller, and reduced the ghost
tracking setting. This caused the tracker to work properly.
Chris
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
