Yes you push the small green tab on the breaker for the direction desired.


Dana Orzel                              Great Solar Works, Inc. 
C - 208.721.7003                       d...@solarwork.com
Idaho Contractor - # 028765         Idaho PV # 028374
NABCEP # 051112-136                       www.solarwork.com
"Responsible Technologies for Responsible People since 1988"  
 Please consider the environment before printing this email.


-----Original Message-----
From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> On Behalf Of Dave 
Angelini Offgrid Solar
Sent: Thursday, September 05, 2019 9:11 AM
To: RE-wrenches <re-wrenches@lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Residential tracker that has horizontal axis in 
east-west orientation? Problem appears solved

Thanks Chris for the follow up. These were HZLA'a right? Kyle and his Dad Jeff 
are great for Wattsun Support! These units have the manual track mode also, 
right?

Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridso...@sti.net
text 209 813 0060

On Thu, 5 Sep 2019 07:52:11 -0400, Christopher Warfel 
<cwar...@entech-engineering.com> wrote:
> I wanted to follow up on the issue I had previously posted.
> 
> We installed two ArrayTech trackers at different sites in the 
> unconventional east-west orientation. One worked well and one operated 
> so that it was not facing south very often.  Kyle was able to guide me 
> through some troubleshooting and it appears the problem is fixed.
> 
> The tracker that worked properly had the sensor on the west end of the 
> array and was pointed east.  The tracker not working as expected had 
> the

> sensor on the east end of the array and was pointed west.  We swapped 
> the east/west sensor wires in the controller, and reduced the ghost 
> tracking setting.  This caused the tracker to work properly.
> 
> 
> Chris
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive:
>
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org

-- 

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to