You have to be in manual mode and that is not very easy and we did not
want to defeat the purpose of automation. We have done the manual ones
and they do work very well. People like to move the modules if it is
easy. And, these are really easy. I even did it by just using my
fingers. (oyster farm work helps with that)
On 9/5/2019 11:56 AM, Dana wrote:
Yes you push the small green tab on the breaker for the direction desired.
Dana Orzel Great Solar Works, Inc.
C - 208.721.7003 d...@solarwork.com
Idaho Contractor - # 028765 Idaho PV # 028374
NABCEP # 051112-136 www.solarwork.com
"Responsible Technologies for Responsible People since 1988"
Please consider the environment before printing this email.
-----Original Message-----
From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> On Behalf Of Dave
Angelini Offgrid Solar
Sent: Thursday, September 05, 2019 9:11 AM
To: RE-wrenches <re-wrenches@lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Residential tracker that has horizontal axis in
east-west orientation? Problem appears solved
Thanks Chris for the follow up. These were HZLA'a right? Kyle and his Dad Jeff
are great for Wattsun Support! These units have the manual track mode also,
right?
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridso...@sti.net
text 209 813 0060
On Thu, 5 Sep 2019 07:52:11 -0400, Christopher Warfel
<cwar...@entech-engineering.com> wrote:
I wanted to follow up on the issue I had previously posted.
We installed two ArrayTech trackers at different sites in the
unconventional east-west orientation. One worked well and one operated
so that it was not facing south very often. Kyle was able to guide me
through some troubleshooting and it appears the problem is fixed.
The tracker that worked properly had the sensor on the west end of the
array and was pointed east. The tracker not working as expected had
the
sensor on the east end of the array and was pointed west. We swapped
the east/west sensor wires in the controller, and reduced the ghost
tracking setting. This caused the tracker to work properly.
Chris
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
