Jason:
Fine stranded cables can be used with set screw terminals if you use ferrules. You hint at a broader point: The industry is not providing solutions that the regulators are demanding. Any battery with BMS should have a remote inhibit. Problem solved. William Miller Solar 17395 Oak Road, Atascadero, CA 93422 805-438-5600 www.millersolar.com CA Lic. 773985 *From:* RE-wrenches [mailto:[email protected]] *On Behalf Of *Jason Szumlanski via RE-wrenches *Sent:* Tuesday, July 29, 2025 2:45 PM *To:* RE-wrenches *Cc:* Jason Szumlanski *Subject:* Re: [RE-wrenches] Battery RSD The problem I see with just complying is that there is really no practical or cost-effective way to comply. You would have to somehow transition from battery cable to some other cable type, because typical fusible disconnect switch lugs are not going to be rated to accept fine-stranded battery cable, especially in the required size.
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
