Did ya change the master/slave jumper on the HDa drive to single drive when you removed the hdb drive by any chance? Is this a compaq by any chance that would now prefer you switched to cable select? Does the drive show up in the bios?
does it actually try to boot?
Hardware wise, everything checks out. Without the second drive, hda gets set to master (jumper gets removed), and with it gets set to master with slave, and hdb set as slave. (I don't believe in cable select because it caused me more problems that it's worth.) And no, it's not an inferior Compaq. BIOS wise, everything checks out again. It sees what it has and moves on. And yes, it does try to boot up which is how I get the GRUB line on the screen, but nothing else.
Dropping the boot floppy in the system, it boots fine. And now that I've reinstalled hdb, it all works again, however as soon as I disconnect it (and revert all jumper and bios settings back to single drive), grub fails.
[ answering your second message here as well ]
Kudzu's not installed on the machine.Maybe grub knows about the second drive through Kudzu finding it or something,
Do you see it listed in grubs config (which I posted earlier)? I certainly don't.it is listed in grubs config file and grubs barfs when it cant find it
-- W | I haven't lost my mind; it's backed up on tape somewhere. +-------------------------------------------------------------------- Ashley M. Kirchner <mailto:[EMAIL PROTECTED]> . 303.442.6410 x130 IT Director / SysAdmin / WebSmith . 800.441.3873 x130 Photo Craft Laboratories, Inc. . 3550 Arapahoe Ave. #6 http://www.pcraft.com ..... . . . Boulder, CO 80303, U.S.A.
-- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
