Although this is a Linux discussion group, I have found Windows pretty tolerant of
system board changes. I am currently runing a copy of Windows98 Second Edition
that started out life as Windows95 Upgraded Edition and it has been migrated across
atleast 4 system boards and 5 hard drives over the years, currently runing on a
K6-350. Windows95/98 seems is a too smart/too dumb adaptive semi-intelligent
operating system and as long as you know what you have in making sure the proper
drivers are available and loaded, it works well, almost under water. I have an
OSR2b image that I use in the workplace that so far has adapted to every system I
have put it on, multiple reboots while it learns and adapts which is normal. We
are hoping for the day that Linux is that this "adaptive" and self-configuring but
in the meantime we'll continue to tweak .conf files...
fred smith wrote:
> On Fri, Dec 24, 1999 at 06:44:45PM +1030, lloy0076 wrote:
> >
> > Hi There!
> >
> > I have recently installed an MS-5184 Baby AT VI4 Motherboard with an AMD
> > K6-III running at 450MHZ. I used to run an AMD K6-II @ 366MHZ with an
> > old, 66MHZ board. The memory is exactly the same. Some people said I
>
> You're not using PC100 RAM with the new board? I'd think that would
> cost you BIG on performance since you can't (shouldn't) run old RAM
> at the 100Mhz bus speed the K6-III will prefer.
>
> > would notice a difference; some said I wouldn't. My experiences so far
> > are:
> >
> > * StarOffice actually looks like it's doing something and reacts
> > straight away
> > * Netscape loads almost at the click of a button
> > * X runs significantly faster
> > * The GIMP loads significantly faster
> >
> > In my opinion the upgrade has been worth it. Besides, I now have two
> > relatively fast machines. The older KG II @ 366MHZ was certainly quite
> > fast and I still have it; just gotta get round to installing it into a
> > case somewhere. The only glitch is that it killed my Windows (again).
>
> Yeah, I learned the hard way last spring when I put a new motherboard in
> my system that Windoze positively *hates* it when the hardware changes
> out from under it. I'm told I should have gone to "control panel"
> "system" and removed all the system devices when shutting down the old
> motherboard for the last time. I didn't, and had a major war with
> Windoze to get it to even work. Even after the war there's still a
> skirmish or two (every time it boots Windows kindly "finds new hardware"
> for me, and it's always my sound card and my IDE disk controller--which
> it already knows about and which work fine. I've got to tell it CANCEL
> else it'll install a second copy of them. Every time!).
>
> >
> > Because some of the I/O port addresses are different, Windows is asking
> > this and asking that and asking this and askng that. I will eventually
> > get around to installing the stupid thing....
>
> You could TRY doing what I suggest above, i.e., remove all the devices
> under control-panel/system, shut it down then reboot windoze and let it
> re-find all the hardware again. Reputed to work. Helped when I did it,
> except for the ongoing issue I mention above which is not helped by
> that technique.
>
> Thank goodness I rarely boot windoze on that system (I've got an old 486
> on which I run Windoze when I absolutely have to) so it's not much of a
> problem anymore.
>
> Fred
> --
> ---- Fred Smith -- [EMAIL PROTECTED] ----------------------------
> But God demonstrates his own love for us in this:
> While we were still sinners,
> Christ died for us.
> ------------------------------- Romans 5:8 (niv) ------------------------------
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.