Hi...again... no, I haven't tried that yet...I'm back in windows...right now... I will try it tommorrow, and let you know. Thanks for sticking with me...here.
in order to boot to the scsi drive i have to unplug (ide drive)... then reset the bios on reboot...then if i want to reboot back onto the linux drive, I have to plug it back in...and rest the bios on reboot... it's a bummer...man, i hope you can help me get this working right. Ray Curtis wrote: > > >>>>> "k" == kompukit <Admin> writes: > > k> Ok...thanks...NOW I only see...a linux option and a win98 option... > k> BUT ...I STILL can't boot into win98 (on the scsi drive)...after > k> selecting it. > k> WHY? > > >From what I see below, this stanza is booting win98: > > other=/dev/sda1 > optional > table=/dev/sda > label="Win98" > > Have you tried changing: > > other=/dev/sda1 > to: > other=/dev/sda > > and re-running lilo -v -v > > k> also, I got the modem working...but not the way it should be, > k> and when it connects, its connection speed is intermittent...and > k> changing. > k> it's also a 56k external modemblaster. > > k> also got the printer working fine, no problems. > > k> Ray Curtis wrote: > >> > >> >>>>> "k" == kompukit <Admin> writes: > >> > k> this is my current lilo.conf > k> as for the drive win98 is on...it's sda1 > >> > k> boot="/dev/hda" > k> map=/boot/map > k> install=/boot/boot.b > k> prompt > k> timeout="50" > k> message=/boot/message > k> linear > k> default=linux > >> > k> image="/boot/vmlinuz-2.4.2-2" > k> label="linux" > k> initrd="/boot/initrd-2.4.2-2.img" > k> read=only > k> root="/dev/hda5" > k> append="hdd=ide-scsi" > >> > k> other=/dev/sda1 > k> optional > k> table=/dev/sda > k> label="Win98" > >> > >> Delete the next entries completely, totally duplicates > >> and the second other= is why it gave you the dos entry. > >> > >> So if I understand what you have here, you have two drives > >> hda & sda. > >> /dev/hda is a linux drive where hda5 is the / partition. > >> /dev/sda is the win98 drive that is a single partition. > >> > k> image="/dev/sda1" > k> root="/dev/hda5" > k> initrd="/boot/initrd-2.4.2-2.img" > k> append="hdd=ide-scsi" > >> > k> image="/dev/sda1" > k> root="/dev/hda5" > k> initrd="/boot/initrd-2.4.2-2.img" > k> append="hdd=ide-scsi" > >> > k> image="/dev/sda1" > k> root="/dev/hda5" > k> initrd="/boot/initrd-2.4.2-2.img" > k> append="hdd=ide-scsi" > >> > k> other= > k> label="" > >> > >> Now, re-run lilo -v -v and then reboot. > >> > > -- > Ray Curtis Unix Programmer/Consultant Curtis Consulting > mailto:[EMAIL PROTECTED] http://www.ccux.com > > _______________________________________________ > Redhat-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/redhat-list -- <******** http://www.myispnet.net ********> Admin [EMAIL PROTECTED] ICQ# 7110071 MSN Messenger= [EMAIL PROTECTED] _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list