ok...I figure out that much...and before I read this email...I did what you suggested already...then I edited fstab to reflect this change... and now...I can access it...fine, thanks... but, now what i need to do...is be able to setup lilo so that upon boot...I can select between redhat and win 98 to then boot... as i was able to do in mandrake...how do I do this?
also having trouble with setting up my printer....and external modem... but thats for later... thanks so much for helping me get this far... "Ashley M. Kirchner" wrote: > > Admin wrote: > > > Device Boot Start End Blocks ID System > > /dev/sda1 1 1106 8883913 c Win95 > > Fat32 (LBA) > > > > I don't understand why it says win95, as I run win98 2nd ed, > > System Types are the same between Win95 and 98. > > > but this seems > > like this is my scsi drive....so it appears redhat has seen the scsi at > > least... so says the dmesq also > > > > what do i do now? > > $ mkdir /mnt/win98 > $ mount -t vfat /dev/sda1 /mnt/win98 > > This will mount that partition under /mnt/win98 where you can go list (ls) it >and do whatever you need to do. > > -- > H | "Life is the art of drawing without an eraser." - John Gardner > +-------------------------------------------------------------------- > Ashley M. Kirchner <mailto:[EMAIL PROTECTED]> . 303.442.6410 x130 > Director of Internet Operations / SysAdmin . 800.441.3873 x130 > Photo Craft Laboratories, Inc. . 3550 Arapahoe Ave, #6 > http://www.pcraft.com ..... . . . Boulder, CO 80303, U.S.A. > > _______________________________________________ > Redhat-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/redhat-list _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list