You are pretty close, Ken!! In low band & high band, the HHT had 2 or 3 tubes on the exciter while the LHT & MHT were solid state in the exciter. All models had 2 tubes in the PA deck, which were basically not visible.
Ken Arck <[EMAIL PROTECTED]> wrote: > At 02:54 PM 3/22/2004 -0600, you wrote: > The tube versions would end > >with HHT, for example. I think that the solid state > >version would be a MHT or perhaps an LHT so that the > >solid model would be something like U43MHT. > > <---Wow, it's been a number of years since I've dealt with this but as I > remember, the HHT was the earliest version of a Motrac but not the only one > in the series that had tubes in the xmtr. I believe ALL Motracs had at > least one tube in the xmtr, but used less of them in each later version. > > It wasn't until the Motran that the xmtrs went all solid state (crummy PNP > devices too!). Of course, I've been wrong before! > > Ken > (has a photographic memory but lately I've been running low on film) > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/