well they are magnetic ----- Original Message ----- From: "Ken Arck" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, June 03, 2004 10:46 PM Subject: Re: [Repeater-Builder] help I need
> At 10:41 PM 6/3/2004 -0400, you wrote: > >how about another way take the screws out the bottom punch out the epoxy run > >a tap through to clean up the threads then make some new screws out of 10X32 > >1" long machine screw by cutting the heads off and putting a cut in the top > >for a screw driver so that you can tune them up. > > <---I'm not sure there is enough room inside to get a beefy enough pair of > needle nose in there to do that but maybe there is. I guess replacing the > screws entirely would work, as they looked like plated steel to me but I > might be wrong about that.. > > Ken > -------------------------------------------------------------------------- ---- > President and CTO - Arcom Communications > Makers of state-of-the-art repeater controllers and accessories. > http://www.ah6le.net/arcom/index.html > AH6LE/R - IRLP Node 3000 > http://www.irlp.net > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
