Jim Cicirello wrote: >Good Morning to the group: >Can someone who may have been there and done that tell me the best >way to operate both CTCSS and CSQ Decode from a Micor Base converted >into a repeater? Let me clarify what I would like to do…..I would >like to be able to touch tone in CTCSS Decode when needed. The >majority of the time I want to run CSQ. >
What controller are you running, or are you using stock control cards? > In studying the manual it >appears that CTCSS is active high and CSQ is active low. > Correct, but the COS logic can be changed to Active High: <http://www.repeater-builder.com/pix/cosswitch.gif> > I thought of >converting them to the same active COR state and them just switching >the COR input to the controller, but is CSQ present when the CTCSS >switch is in the decode position? > Again, what piece of equipment are we talking about when you refer to "the CTCSS switch"? A stock card or something else? Kevin Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/