Check to see if Zone 2 Function 5 is turned on. If on, it could let a COR
signal get to your repeater without having the correct CTCSS frequency decoded.
73 - Jim W5ZIT
--- On Sun, 8/31/08, n9lv <[EMAIL PROTECTED]> wrote:
From: n9lv <[EMAIL PROTECTED]>
Subject: [Repeater-Builder] MSF5000 Tone Issue, PL 131.8 opens cor, non 131.8
keys repeater but no audio
To: Repeater-Builder@yahoogroups.com
Date: Sunday, August 31, 2008, 10:44 AM
I have the analog MSF5000 repeater that has the Cat300DX repeater
controller installed. Not sure if this has been this way all along,
but I noticed there is another repeater somewhere close that has a
different PL. When they are using there repeater, it will cerchunk my
442.000 repeater. My PL is 131.8, and that will open the squelch and
allow audio out the repeater. Any other PL will not open the repeater,
but will consistanly cerchunk the repeater and causes the courtesy tone
to trip as well as the rest and wait id timers. Any ideas.
Mathew
_.
