I believe that is only available in the digital series where programming is done via the rib. This one is the eprom analog setup. I am thinking there must be another control line going to the controller that I am missing.
Mathew - In Repeater-Builder@yahoogroups.com, "n9wys" <[EMAIL PROTECTED]> wrote: > > Mathew, > > Try programming it for "tone only" control (I believe that is option "S" in > both Repeater Control and Receiver Control. Mode Information screen) - this > way even if the station hears a carrier, it won't "react" to it. > > I'm planning on doing that with my station - right now it's set for "SC" > > Mark - N9WYS > > -----Original Message----- > From: Repeater-Builder@yahoogroups.com On Behalf Of n9lv > > That is what I thought was wrong first of all, tried it both ways and > no change either way. I thought for sure when I wired up the > controller that it was fine, but not sure when the other repeater > came into the picture. I am going to check the switches today and > see if there is anything there. > > Mathew > > --- In Repeater-Builder@yahoogroups.com, Jim Brown <w5zit@> wrote: > > > > Check to see if Zone 2 Function 5 is turned on. If on, it could > let a COR signal get to your repeater without having the correct > CTCSS frequency decoded. > > > > 73 - Jim W5ZIT >