I have seen it in the past that a repeater would come in from Motorola on the wrong freg because the rep ordered it wrong then the service made the corrections and that could be your current freg.
John ----- Original Message ----- From: Christopher Hodgdon To: Repeater-Builder@yahoogroups.com Sent: Thursday, August 13, 2009 7:29 PM Subject: [Repeater-Builder] Re: Motorola MTR2000 Question Here's the deal, I work for a local school district, I have been kind of thrust into a temp. communications specialist position while we obtain some new buses and working with the company that will be adding the new radios to them. Over the last few weeks, we have been trying to determine the location of our repeater. The place were it is listed on the FCC license paperwork does not exist. I know, I am pushing them to get it updated. But that is another story all together. I do have access to a "radio house" located at our high school football field and it has two MTR2000 in it, plus two different antennas. One connected to one radio and one connected to the other. One radio is marked with the description of KISD PD, which is our police department for the district and has the following frequency pair listed on it: VHF: RX 173.325 DPL 331 and TX 158.385 DPL 331 The other radio is marked the following: UHF: 451.725 / 456.725 There is no documentation with this equipment, the person incharge of them originally left the district some years ago and no one knows anything about them, expect where they are located, as far as these two boxes go and what frequencies that have listed. Which brings me back to our department, we can find out repeater located anywhere physcially. Our repeater pair is listed as: UHF: 451.750 / 456.750 That is according to FCC, repeater listing and other information I have been able to obtain and by listening to it on a UHF amateur radio to see which frequency they were on. That being said, it is possible that the MTR2000 that is marked with the one UHF frequency, might actually have both pairs programmed into it, but only one can run at a time, right? Is there a way to find out if there is more than one frequency is programmed into the unit and if so, how might we go about that? Another reason I am asking is that we might be upgrading our system in the very near future and I might be able to get my hands on these repeaters. Thanks in advance. --- In Repeater-Builder@yahoogroups.com, Brian Raker <brian.ra...@...> wrote: > > The radio can be programmed for multiple frequency pairs. That being > said, it cannot operate more than one channel / programmed pair of > frequencies at one time. > > -Brian / KF4ZWZ > > On Thu, Aug 13, 2009 at 3:23 PM, Christopher > Hodgdon<chris.hodg...@...> wrote: > > This is a question I have been asked and don't have an answer for. This could be for either amateur operation or commercial operation, but it relates to the repeater itself. > > > > Can a Motorola MTR2000 setup on UHF be setup to function as a repeater on more than one pair of frequencies? I know looking at the brochure on the website, it says that the NO. of Frequencies are upto 32. > > > > Does that mean it can handle two different sets of repeater pairs at the same time in the same radio? > > > > These are commercial frequencies I am listed at commercial, but they are for example purposes: > > > > Can the following setup work with the MTR2000? > > > > Frequency Pair 1: 451.725/456.725 > > Frequency Pair 2: 451.750/456.750 > > > > Can one MTR2000 handle both of these at the same time? > > > > Thank in advance. > > > > > > > > ------------------------------------ > > > > > > > > Yahoo! Groups Links > > > > > > > > >