I have a small drill press that holds a Dremel tool that is perfect for
things like this where you don't need a big press.
Fairly inexpensive if I remember correctly, had it for years.
Carey
Carey Probst
Member, M.I.T. Educational Council
S Scale, Sn3 and S High Rail/AF
A well regulated militia being necessary to the security of a free State,
the right of the people to keep and bear arms shall not be infringed.
On 8/18/2011 9:32 AM, Andre Ming wrote:
>
> Hi Dave:
>
> Thanks for the tip on the carbide drill bits. I have a drill press...
> but I don't know if it will chuck down to .020". I'll have to remember
> to check that.
>
> Andre Ming
>
> > If you want to drill small holes in a steel frame find a friend
> > with a drill press and then buy small carbide bits of the correct
> > size.
>
> [Non-text portions of this message have been removed]
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
