--- In [email protected], "Andre Ming" <laming@...> wrote:
>
> Hi Dave:
>
> Thanks for the tip on the carbide drill bits. I have a drill press... but I
> don't know if it will chuck down to .020". I'll have to remember to check
> that.
>
Hi Andre, The carbide micro bits I use all have a .125 or 1/8 inch shank so
no problem chucking them. Look on ebay for set of re-sharpened ones, a box of
50 or so should only cost a few dollars...DaveBranum
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
