Hi Andre
I found that I had to use the chucks from my dremel set to use my drill press
with the micro bits. I bought the set of chucks at Home Depot.
Howard Sheffield
On Aug 18, 2011, at 6:32 AM, Andre Ming wrote:
> Hi Dave:
>
> Thanks for the tip on the carbide drill bits. I have a drill press... but I
> don't know if it will chuck down to .020". I'll have to remember to check
> that.
>
> Andre Ming
>
> > If you want to drill small holes in a steel frame find a friend
> > with a drill press and then buy small carbide bits of the correct
> > size.
>
> [Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
