When I save the layout with only the board on it and Auto load first layout is selected, the next time Scid starts the board doesn't show up, only the "board" tab can be seen. After resizing the window the board appears. It happens only when there is no other tab open besides Board when the layout was saved.
On Jan 20, 2009, at 1:32 PM, Alexander Wagner wrote: > Israel Chauca Fuentes wrote: > > Hi! > >> This works: >> wm geometry $w -10+22 >> Is there any way to link the height to the screen >> resolution? the current height of the help window is too >> big for small screens. > > This is another reason why I'd suggest to hook up with > geometry manager. Then, the window manager is free to set > size and position for the initial window and the user can > scale it to his liking it's (re)stored. I think, hardcoded > sizes and positions should be avoided. (IMHO!) > > I think, I could add this to cvs, in case. > > BTW: Gnome would require +26. > > -- > > Kind regards, / War is Peace. > | Freedom is Slavery. > Alexander Wagner | Ignorance is Strength. > | > | Theory : G. Orwell, "1984" > / In practice: USA, since 2001 ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Scid-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/scid-users
