2009/1/21 Israel Chauca Fuentes <[email protected]>
>
> On Jan 21, 2009, at 4:09 AM, Pascal Georges wrote:
>
> 2009/1/20, Israel Chauca Fuentes <[email protected]>:
>>
>>> When I save the layout with only the board on it and Auto load first
>>> layout is selected, the next time Scid starts the board doesn't show
>>> up, only the "board" tab can be seen. After resizing the window the
>>> board appears. It happens only when there is no other tab open besides
>>> Board when the layout was saved.
>>>
>>
>> I tested on Linux and Windows and can't reproduce this (you use a Mac,
>> right ?).
>> Does it happen also when you load layout #2 and switch back to layout #1 ?
>>
>
> Yes, I use a Mac and it happens when I switch between layouts. It also
> happens if I do the following:
>
> - Board is the only tab in the window.
> - Open PGN tab (or any other tab), it appears over the Board covering it.
> - Bring Board tab to the front (appears normally).
> - Move PGN tab to the left (or any other direction).
> - Board tab appears empty.
>
> Betas 1 and 2 have no problem restoring layouts and the tab moving, beta 3
> shows both issues.
>
Could you try current CVS ?
I removed some optimisations.
Pascal
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Scid-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/scid-users
