On Jan 21, 2009, at 4:09 AM, Pascal Georges wrote: > 2009/1/20, Israel Chauca Fuentes <[email protected]>: >> When I save the layout with only the board on it and Auto load first >> layout is selected, the next time Scid starts the board doesn't show >> up, only the "board" tab can be seen. After resizing the window the >> board appears. It happens only when there is no other tab open >> besides >> Board when the layout was saved. > > I tested on Linux and Windows and can't reproduce this (you use a Mac, > right ?). > Does it happen also when you load layout #2 and switch back to > layout #1 ?
Yes, I use a Mac and it happens when I switch between layouts. It also happens if I do the following: - Board is the only tab in the window. - Open PGN tab (or any other tab), it appears over the Board covering it. - Bring Board tab to the front (appears normally). - Move PGN tab to the left (or any other direction). - Board tab appears empty. Betas 1 and 2 have no problem restoring layouts and the tab moving, beta 3 shows both issues. ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Scid-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/scid-users
