On Jan 21, 2009, at 3:14 PM, Pascal Georges wrote: > 2009/1/21 Israel Chauca Fuentes <[email protected]> > >> >> On Jan 21, 2009, at 4:09 AM, Pascal Georges wrote: >> >> 2009/1/20, Israel Chauca Fuentes <[email protected]>: >>> >>>> When I save the layout with only the board on it and Auto load >>>> first >>>> layout is selected, the next time Scid starts the board doesn't >>>> show >>>> up, only the "board" tab can be seen. After resizing the window the >>>> board appears. It happens only when there is no other tab open >>>> besides >>>> Board when the layout was saved. >>>> >>> >>> I tested on Linux and Windows and can't reproduce this (you use a >>> Mac, >>> right ?). >>> Does it happen also when you load layout #2 and switch back to >>> layout #1 ? >>> >> >> Yes, I use a Mac and it happens when I switch between layouts. It >> also >> happens if I do the following: >> >> - Board is the only tab in the window. >> - Open PGN tab (or any other tab), it appears over the Board >> covering it. >> - Bring Board tab to the front (appears normally). >> - Move PGN tab to the left (or any other direction). >> - Board tab appears empty. >> >> Betas 1 and 2 have no problem restoring layouts and the tab moving, >> beta 3 >> shows both issues. >> > > Could you try current CVS ? > I removed some optimisations.
Still happens. If I right click where the board should be I get the contextual menu that I get when I right click on the tab itself (move left, etc., Show game info, Automatic re-size of board). ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Scid-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/scid-users
