Stus-List water ingress
yet another question for experienced sailors: today I was winterizing my boat, I found sitting water in my compartment under the cockpit storage, not a lot, but there was some. my boat was already out of the water. I found it actually came from the spot in the picture below: https://drive.google.com/file/d/1SdYK9pceDLR4bHu6CRPv3fJBszH7C7XT/view?usp=sharing https://drive.google.com/file/d/1eQi22w6r1snDEwGHsadC3c4YChVj2seW/view?usp=sharing There is no water at the top of the storage, or on the deck anywhere; it rained last week a lot but not today; it seems that the water drips when the wind blows a bit harder. I don't think I saw it when the boat was in the water, or it could be that I did not notice it or not as much water. any comments and suggestions? Thx. Bo -- 1974 C&C 35 MK2 Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Re: Stus-List Water Ingress ??
I had water coming in the bilge pump on my boat the first time out last spring. I could actually go below and see the water coming in through the bilge pump hose while motoring. It stopped when we slowed down. What I have not figured out is why it happened the first time we motored, but not after that. I replaced the one way valve anyway. Dave Dr. David Knecht Professor of Molecular and Cell Biology Core Microscopy Facility Director University of Connecticut 91 N. Eagleville Rd. Storrs, CT 06269 860-486-2200 > On Dec 14, 2015, at 2:00 PM, Jerome Tauber via CnC-List > wrote: > > I had the same setup on my 24. Scuppers led straight down to a through hull > with a sea cock. However, if there is a leak above the water line it will > only occur only when boat is in motion and transom is submerged or healed. > Try closing the through hull sea cock on one side at a time and see if you > get the leak. If it stops with one closed that is your culprit. Leak has > to be somewhere in the hose above the water line or else it would be > constant.Jerry > > Sent from my iPhone > > On Dec 14, 2015, at 11:17 AM, Chuck Gilchrest via CnC-List > mailto:cnc-list@cnc-list.com>> wrote: > >> Bill, >> The cockpit drains on a C&C 25 drain vertically through the hull via through >> hulls with sea cocks, not aft through the transom. Some early boats had >> gate valves which should be changed for sure. If hoses or hose clamps were >> leaking, you’d see water coming in all the time as the through hulls are >> always submerged on this boat. >> Chuck Gilchrest >> S/V Half Magic >> C&C 25 Mk 1 1975 >> <> >> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com >> <mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of Bill Bina - gmail via >> CnC-List >> Sent: Monday, December 14, 2015 11:56 AM >> To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> >> Cc: Bill Bina - gmail > <mailto:billbinal...@gmail.com>> >> Subject: Re: Stus-List Water Ingress ?? >> >> Change the hoses for your cockpit drains. The outlets on the transom dip >> under water while underway, and old hoses can leak enough to do exactly what >> you are describing. When you buy new hoses, spend the extra money on fuel >> rated hose. You never know what might get spilled in the cockpit in the next >> 15 or 20 years. >> >> Bill Bina >> >> On 12/14/2015 11:45 AM, Sailnomad via CnC-List wrote: >> When tabasco (c&c25 with an outboard) is on the dock, there is absolutely no >> water coming in. When I am out, even motoring, I get some water in, maybe 2 >> quarts an hour, even in calm seas. >> I am in the process of replacing some rusty keel washers, but the nuts seem >> to be tight and I have no "smile". >> >> I have a hard time believing that so much water is seeping through the keel >> bolts. >> Does anybody have any other logical explanation besides pressure created on >> the leading edge of the keel ? I have no stuffing box. >> >> Ahmet >> S/V Waterdancer 43 Irwin MKII I >> S/V Tabasco C&C 25 >> Winthrop, MA, USA >> >> >> >> >> ___ >> >> Email address: >> CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> <http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com> >> >> >> ___ >> >> Email address: >> CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> <http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com> >> > ___ > > Email address: > CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > <http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com> ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress
Thank you for all the feedback. Motor mount might be the culprit. I will check out all suggestions Ahmet On Dec 14, 2015 9:39 PM, "Sailnomad" wrote: > That is always scary, the sing feeling. (pun intended) . I had that once > on my Catalina 36. First sail of the season, sailing hard off and away from > the harbor, suddenly a lot of water. We immediately turned around, 10 miles > from shore. While my wife was steeriing, I investigated the problem. > It turns out that the galley sink hose had come off. It is draining > directly below. The hose fell over so the open tip was below waterline. > Just closed the thruhull > Since then I make sure to close the galley drain thruhll when I am > sailing. On the Irwin 43, the sink will fill up if I heel hard to starboard. > Ahmet > On Dec 14, 2015 8:38 PM, "Daniel Sheer via CnC-List" < > cnc-list@cnc-list.com> wrote: > >> On my trip to New England, Pegathy was taking on a lot of water while >> underway. Turned out to be an open hose attached to a no longer used thru >> hull near the stern. The thru hull was above water line at rest, and below >> while underway. It dumped enough water in to put the floorboards under in a >> 38. Double yikes. Got'cha beat, Touche, but I don't want the trophy. I >> would look near the stern for such a problem, perhaps a cracked cockpit >> drain hose (since the leak is relatively slow, or a bilge pump hose, if >> that thru hull is under water while motoring. I suspect it'll be an easy >> fix. Also, you might see if the lower rudder grudgeon has a leak. That >> might be under water while under way, too. Might be harder to fix. >> >> Dan Sheer >> Pegathy LF38 >> Rock Creek off the Patapsco >> >> ___ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress
That is always scary, the sing feeling. (pun intended) . I had that once on my Catalina 36. First sail of the season, sailing hard off and away from the harbor, suddenly a lot of water. We immediately turned around, 10 miles from shore. While my wife was steeriing, I investigated the problem. It turns out that the galley sink hose had come off. It is draining directly below. The hose fell over so the open tip was below waterline. Just closed the thruhull Since then I make sure to close the galley drain thruhll when I am sailing. On the Irwin 43, the sink will fill up if I heel hard to starboard. Ahmet On Dec 14, 2015 8:38 PM, "Daniel Sheer via CnC-List" wrote: > On my trip to New England, Pegathy was taking on a lot of water while > underway. Turned out to be an open hose attached to a no longer used thru > hull near the stern. The thru hull was above water line at rest, and below > while underway. It dumped enough water in to put the floorboards under in a > 38. Double yikes. Got'cha beat, Touche, but I don't want the trophy. I > would look near the stern for such a problem, perhaps a cracked cockpit > drain hose (since the leak is relatively slow, or a bilge pump hose, if > that thru hull is under water while motoring. I suspect it'll be an easy > fix. Also, you might see if the lower rudder grudgeon has a leak. That > might be under water while under way, too. Might be harder to fix. > > Dan Sheer > Pegathy LF38 > Rock Creek off the Patapsco > > ___ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Stus-List Water Ingress
On my trip to New England, Pegathy was taking on a lot of water while underway. Turned out to be an open hose attached to a no longer used thru hull near the stern. The thru hull was above water line at rest, and below while underway. It dumped enough water in to put the floorboards under in a 38. Double yikes. Got'cha beat, Touche, but I don't want the trophy. I would look near the stern for such a problem, perhaps a cracked cockpit drain hose (since the leak is relatively slow, or a bilge pump hose, if that thru hull is under water while motoring. I suspect it'll be an easy fix. Also, you might see if the lower rudder grudgeon has a leak. That might be under water while under way, too. Might be harder to fix. Dan SheerPegathy LF38Rock Creek off the Patapsco ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress ??
I had the same setup on my 24. Scuppers led straight down to a through hull with a sea cock. However, if there is a leak above the water line it will only occur only when boat is in motion and transom is submerged or healed. Try closing the through hull sea cock on one side at a time and see if you get the leak. If it stops with one closed that is your culprit. Leak has to be somewhere in the hose above the water line or else it would be constant. Jerry Sent from my iPhone > On Dec 14, 2015, at 11:17 AM, Chuck Gilchrest via CnC-List > wrote: > > Bill, > The cockpit drains on a C&C 25 drain vertically through the hull via through > hulls with sea cocks, not aft through the transom. Some early boats had gate > valves which should be changed for sure. If hoses or hose clamps were > leaking, you’d see water coming in all the time as the through hulls are > always submerged on this boat. > Chuck Gilchrest > S/V Half Magic > C&C 25 Mk 1 1975 > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Bina > - gmail via CnC-List > Sent: Monday, December 14, 2015 11:56 AM > To: cnc-list@cnc-list.com > Cc: Bill Bina - gmail > Subject: Re: Stus-List Water Ingress ?? > > Change the hoses for your cockpit drains. The outlets on the transom dip > under water while underway, and old hoses can leak enough to do exactly what > you are describing. When you buy new hoses, spend the extra money on fuel > rated hose. You never know what might get spilled in the cockpit in the next > 15 or 20 years. > > Bill Bina > > On 12/14/2015 11:45 AM, Sailnomad via CnC-List wrote: > When tabasco (c&c25 with an outboard) is on the dock, there is absolutely no > water coming in. When I am out, even motoring, I get some water in, maybe 2 > quarts an hour, even in calm seas. > I am in the process of replacing some rusty keel washers, but the nuts seem > to be tight and I have no "smile". > > I have a hard time believing that so much water is seeping through the keel > bolts. > Does anybody have any other logical explanation besides pressure created on > the leading edge of the keel ? I have no stuffing box. > > Ahmet > S/V Waterdancer 43 Irwin MKII I > S/V Tabasco C&C 25 > Winthrop, MA, USA > > > > > ___ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > ___ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress ??
Check the bilge pump lines and the pump itself. The discharge line from the pump should loop up under the aft end of the stbd seat before it drops down to the transom fitting. The rubber flaps in the pump could be worn too, does it take a lot of pumps to prime the pump? Checking the hoses on all the through-hulls is a good idea too. There should be four for sure(cockpit X2, sink and lazerette drain) or five if you have a water intake for your head. Rick Taillieu Nemesis '75 C&C 25 #371 Shearwater Yacht Club Halifax, NS. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Sailnomad via CnC-List Sent: December-14-15 12:46 To: cnc-list@cnc-list.com Cc: Sailnomad Subject: Stus-List Water Ingress ?? When tabasco (c&c25 with an outboard) is on the dock, there is absolutely no water coming in. When I am out, even motoring, I get some water in, maybe 2 quarts an hour, even in calm seas. I am in the process of replacing some rusty keel washers, but the nuts seem to be tight and I have no "smile". I have a hard time believing that so much water is seeping through the keel bolts. Does anybody have any other logical explanation besides pressure created on the leading edge of the keel ? I have no stuffing box. Ahmet S/V Waterdancer 43 Irwin MKII I S/V Tabasco C&C 25 Winthrop, MA, USA _ No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6176 / Virus Database: 4483/11179 - Release Date: 12/14/15 ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress ??
Bill, The cockpit drains on a C&C 25 drain vertically through the hull via through hulls with sea cocks, not aft through the transom. Some early boats had gate valves which should be changed for sure. If hoses or hose clamps were leaking, you'd see water coming in all the time as the through hulls are always submerged on this boat. Chuck Gilchrest S/V Half Magic C&C 25 Mk 1 1975 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Bina - gmail via CnC-List Sent: Monday, December 14, 2015 11:56 AM To: cnc-list@cnc-list.com Cc: Bill Bina - gmail Subject: Re: Stus-List Water Ingress ?? Change the hoses for your cockpit drains. The outlets on the transom dip under water while underway, and old hoses can leak enough to do exactly what you are describing. When you buy new hoses, spend the extra money on fuel rated hose. You never know what might get spilled in the cockpit in the next 15 or 20 years. Bill Bina On 12/14/2015 11:45 AM, Sailnomad via CnC-List wrote: When tabasco (c&c25 with an outboard) is on the dock, there is absolutely no water coming in. When I am out, even motoring, I get some water in, maybe 2 quarts an hour, even in calm seas. I am in the process of replacing some rusty keel washers, but the nuts seem to be tight and I have no "smile". I have a hard time believing that so much water is seeping through the keel bolts. Does anybody have any other logical explanation besides pressure created on the leading edge of the keel ? I have no stuffing box. Ahmet S/V Waterdancer 43 Irwin MKII I S/V Tabasco C&C 25 Winthrop, MA, USA ___ Email address: CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress ??
Ahmet, Half Magic, my 1975 25 Mk 1 always seems to have a small amount of bilge water, but as boldly as I can check, it always appears to be fresh water, which I suspect works its way through voids between the deck and hull, small cracks in the cockpit coaming or some other source. My boat has had a slight “smile” since I purchased it in 2001, and I had an incident entering the channel at Cuttyhunk where I marked some submerged rocks with a bit of blue paint (just as a reference point for fellow mariners), but the keel/hull joint hasn’t seemed to weep water, either on the mooring or underway. Half Magic had a Vire engine before I bought it, but the previous owner switched to an outboard and plugged all the inboard related through hulls prior to my purchase of the boat. On a separate note, I’ve got a new boat under contract (35 Landfall) and Half Magic may be on the market soon. I noticed in some of your earlier posts that you were asking about sails for racing/cruising. I have two mainsails for my 25, one is a North NorDac racing Main and the other a decent Thurston cross cut dacron (older). I’ve kept the racing main just for that purpose and it have very limited use. Additionally, I’ve got a 150 North Norlam Genoa with VERY low usage since Buzzards Bay tends to be more of a 15-25kt body of water whenever I’ve taken the boat out for racing. My other two jibs are a bit older, a 135 Newport dacron sail and the other is a Mylar 100% Thurston, both are serviceable but not new and crisp like the others. If you want to discuss any of these sails for your boat, I’m happy to do so… Best regards, Chuck Gilchrest S/V Half Magic C&C 25 Mk 1 1975 Sent: Monday, December 14, 2015 11:46 AM To: cnc-list@cnc-list.com Cc: Sailnomad Subject: Stus-List Water Ingress ?? When tabasco (c&c25 with an outboard) is on the dock, there is absolutely no water coming in. When I am out, even motoring, I get some water in, maybe 2 quarts an hour, even in calm seas. I am in the process of replacing some rusty keel washers, but the nuts seem to be tight and I have no "smile". I have a hard time believing that so much water is seeping through the keel bolts. Does anybody have any other logical explanation besides pressure created on the leading edge of the keel ? I have no stuffing box. Ahmet S/V Waterdancer 43 Irwin MKII I S/V Tabasco C&C 25 Winthrop, MA, USA ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress ??
I've had the same problem and it turned out that there was no anti-siphon loop in the bilge pump lime to the transom. The water siphons back to the pump and you can get a lot of water in that way. My floor board were submerged in a 35 footer. Yikes! Gary S/V High Maintenance '90 C&C 37 Plus East Greenwich, RI, USA ~~~_/)~~ On Mon, Dec 14, 2015 at 11:45 AM, Sailnomad via CnC-List < cnc-list@cnc-list.com> wrote: > When tabasco (c&c25 with an outboard) is on the dock, there is absolutely > no water coming in. When I am out, even motoring, I get some water in, > maybe 2 quarts an hour, even in calm seas. > I am in the process of replacing some rusty keel washers, but the nuts > seem to be tight and I have no "smile". > > I have a hard time believing that so much water is seeping through the > keel bolts. > Does anybody have any other logical explanation besides pressure created > on the leading edge of the keel ? I have no stuffing box. > > Ahmet > S/V Waterdancer 43 Irwin MKII I > S/V Tabasco C&C 25 > Winthrop, MA, USA > > ___ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress ??
Water tank leaking? Scupper drain hose? Rudder post? Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Dec 14, 2015 11:46 AM, "Sailnomad via CnC-List" wrote: > When tabasco (c&c25 with an outboard) is on the dock, there is absolutely > no water coming in. When I am out, even motoring, I get some water in, > maybe 2 quarts an hour, even in calm seas. > I am in the process of replacing some rusty keel washers, but the nuts > seem to be tight and I have no "smile". > > I have a hard time believing that so much water is seeping through the > keel bolts. > Does anybody have any other logical explanation besides pressure created > on the leading edge of the keel ? I have no stuffing box. > > Ahmet > S/V Waterdancer 43 Irwin MKII I > S/V Tabasco C&C 25 > Winthrop, MA, USA > > ___ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress ??
Any chance there is a crack in a cockpit drain hose and under motor when the boat says a bit it is forcing water through the hose Crack? Rain water and such would likely flow straight through without significant or any leakage. Just a thought and easier than removing and retourquing keel bolts. Sent from my Samsung device Original message From: Sailnomad via CnC-List Date: 2015-12-14 12:45 (GMT-04:00) To: cnc-list@cnc-list.com Cc: Sailnomad Subject: Stus-List Water Ingress ?? When tabasco (c&c25 with an outboard) is on the dock, there is absolutely no water coming in. When I am out, even motoring, I get some water in, maybe 2 quarts an hour, even in calm seas. I am in the process of replacing some rusty keel washers, but the nuts seem to be tight and I have no "smile". I have a hard time believing that so much water is seeping through the keel bolts. Does anybody have any other logical explanation besides pressure created on the leading edge of the keel ? I have no stuffing box. Ahmet S/V Waterdancer 43 Irwin MKII I S/V Tabasco C&C 25 Winthrop, MA, USA ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress ??
Could it be siphoning in through your bilge pump discharge hose? Doug "BULLET" C&C 35 MK III _/)~~~_/) ~~~ -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Sailnomad via CnC-List Sent: Monday, December 14, 2015 11:46 AM To: cnc-list@cnc-list.com Cc: Sailnomad Subject: Stus-List Water Ingress ?? When tabasco (c&c25 with an outboard) is on the dock, there is absolutely no water coming in. When I am out, even motoring, I get some water in, maybe 2 quarts an hour, even in calm seas. I am in the process of replacing some rusty keel washers, but the nuts seem to be tight and I have no "smile". I have a hard time believing that so much water is seeping through the keel bolts. Does anybody have any other logical explanation besides pressure created on the leading edge of the keel ? I have no stuffing box. Ahmet S/V Waterdancer 43 Irwin MKII I S/V Tabasco C&C 25 Winthrop, MA, USA ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Stus-List Water Ingress ??
When tabasco (c&c25 with an outboard) is on the dock, there is absolutely no water coming in. When I am out, even motoring, I get some water in, maybe 2 quarts an hour, even in calm seas. I am in the process of replacing some rusty keel washers, but the nuts seem to be tight and I have no "smile". I have a hard time believing that so much water is seeping through the keel bolts. Does anybody have any other logical explanation besides pressure created on the leading edge of the keel ? I have no stuffing box. Ahmet S/V Waterdancer 43 Irwin MKII I S/V Tabasco C&C 25 Winthrop, MA, USA ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress ??
Outboard bracket bolts leaking? David F. Risch 1981 40-2 (401) 419-4650 (cell) Date: Mon, 14 Dec 2015 11:45:43 -0500 To: cnc-list@cnc-list.com Subject: Stus-List Water Ingress ?? From: cnc-list@cnc-list.com CC: sailno...@gmail.com When tabasco (c&c25 with an outboard) is on the dock, there is absolutely no water coming in. When I am out, even motoring, I get some water in, maybe 2 quarts an hour, even in calm seas. I am in the process of replacing some rusty keel washers, but the nuts seem to be tight and I have no "smile". I have a hard time believing that so much water is seeping through the keel bolts. Does anybody have any other logical explanation besides pressure created on the leading edge of the keel ? I have no stuffing box. Ahmet S/V Waterdancer 43 Irwin MKII I S/V Tabasco C&C 25 Winthrop, MA, USA ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com This email has been sent from a virus-free computer protected by Avast. www.avast.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Water Ingress ??
Change the hoses for your cockpit drains. The outlets on the transom dip under water while underway, and old hoses can leak enough to do exactly what you are describing. When you buy new hoses, spend the extra money on fuel rated hose. You never know what might get spilled in the cockpit in the next 15 or 20 years. Bill Bina On 12/14/2015 11:45 AM, Sailnomad via CnC-List wrote: When tabasco (c&c25 with an outboard) is on the dock, there is absolutely no water coming in. When I am out, even motoring, I get some water in, maybe 2 quarts an hour, even in calm seas. I am in the process of replacing some rusty keel washers, but the nuts seem to be tight and I have no "smile". I have a hard time believing that so much water is seeping through the keel bolts. Does anybody have any other logical explanation besides pressure created on the leading edge of the keel ? I have no stuffing box. Ahmet S/V Waterdancer 43 Irwin MKII I S/V Tabasco C&C 25 Winthrop, MA, USA ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com