RE: Outlook Delays since Exchange 2010 SP2 applied

[PRamatowski]

there was nothing in our Kemp (forgot to mention that) - Nothing out of the 
ordinary anyway, just the usual stuff (except for the flurry of activity when 
I's disable one of the CAS boxes and all it's connections would drop/switch).








From: Alice Goodman [ali...@mckinstry.com]
Sent: Tuesday, March 20, 2012 3:56 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Thanks for this.. I also have a Kemp HLB and that might be another place for me 
to look. I only have 2 mailbox servers so I am not sure about the switching of 
active databases.

I also saw more of it in Cached than Uncached mode.

A reboot of ALL servers seems to have quieted things down for now..  but 
Outlook will still say “not responding” at the top of the screen and I am 
looking into it.

Thanks again for your input.

Alice

From: pramatow...@mediageneral.com [mailto:pramatow...@mediageneral.com]
Sent: Tuesday, March 20, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

In our case, it started spreading a bit. I made a secondary DB copy active and 
people said it stared to behave(almost immediately). Next morning I switched 
back and people started having problems again. We've got three cas boxes in the 
site, one by one I disabled them on the Kemp HLB's, stopped services and 
rebooted. Last box the RPC client service hung while shutting down, after 10 
minutes I killed the process and rebooted. Since then(24+hours), all has been 
good.

While it was hung up got a couple calls from same people having outlook 
problems saying they got NDR's to good internal recipients. Neat huh?:)

I just wish I could see, or know where to look to find an indication that that 
service on that box was the culprit

Before and after-
Nothing in event logs, BPA no problems, Exchange troubleshooting assistant 
(delays while using outlook option) showed nothing remarkable. Ran it a few 
times and it called out a few different people but people changed on different 
runs so...



Blackberry

From: KevinM [mailto:kev...@wlkmmas.org]<mailto:[mailto:kev...@wlkmmas.org]>
Sent: Tuesday, March 20, 2012 02:49 PM
To: MS-Exchange Admin Issues 
mailto:exchangelist@lyris.sunbelt-software.com>>
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Netmon traces? – Do you have any WAN accelerators on the network? Are the 
clients connecting with MAPI or HTTPS/RPC. It HTTPS/RPC is there a web proxy on 
the network?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Tuesday, February 28, 2012 6:45 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Outlook 2010 both in cached and non-cached mode.

Email shows up in OWA or on mobile phones prior to Outlook.

I ran Remote Connectivity Analyzer and any errors are certificate based and 
explainable, and I even pointed Exchange towards a different DC to see if that 
makes a difference and it does not seem to.

Alice

From: Michael B. Smith 
[mailto:mich...@smithcons.com]<mailto:[mailto:mich...@smithcons.com]>
Sent: Friday, February 24, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

What version(s) of Outlook?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like “batched” delivery.  In their, words, “I just had another random 
delay, this time on my own mailbox. Everything appeared fine, but then all of a 
sudden several emails all appeared at the same time that were actually 
delivered 10-15 minutes ago.”

I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative domain 
on Feb. 11th.

My understanding is that the settings in Send/Receive do NOT impact Exchange 
users, only POP and IMAP.

Any suggestions on where to start looking?

Thanks,
Alice


Alice Goodman, MCSE, LEED® AP (BD+C)
P 206.832.8295 | C 206.427.7760 | F 206.374.6814
Sr. Exchange Administrator

McKINSTRY FOR THE LIFE OF YOUR BUILDING
Consulting | Construction | Energy | Facility Services

www.mckinstry.com<http://www.mckinstry.com/>




---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http:/

RE: Outlook Delays since Exchange 2010 SP2 applied

[Alice Goodman]

Thanks for this.. I also have a Kemp HLB and that might be another place for me 
to look. I only have 2 mailbox servers so I am not sure about the switching of 
active databases.

I also saw more of it in Cached than Uncached mode.

A reboot of ALL servers seems to have quieted things down for now..  but 
Outlook will still say “not responding” at the top of the screen and I am 
looking into it.

Thanks again for your input.

Alice

From: pramatow...@mediageneral.com [mailto:pramatow...@mediageneral.com]
Sent: Tuesday, March 20, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

In our case, it started spreading a bit. I made a secondary DB copy active and 
people said it stared to behave(almost immediately). Next morning I switched 
back and people started having problems again. We've got three cas boxes in the 
site, one by one I disabled them on the Kemp HLB's, stopped services and 
rebooted. Last box the RPC client service hung while shutting down, after 10 
minutes I killed the process and rebooted. Since then(24+hours), all has been 
good.

While it was hung up got a couple calls from same people having outlook 
problems saying they got NDR's to good internal recipients. Neat huh?:)

I just wish I could see, or know where to look to find an indication that that 
service on that box was the culprit

Before and after-
Nothing in event logs, BPA no problems, Exchange troubleshooting assistant 
(delays while using outlook option) showed nothing remarkable. Ran it a few 
times and it called out a few different people but people changed on different 
runs so...



Blackberry

From: KevinM [mailto:kev...@wlkmmas.org]<mailto:[mailto:kev...@wlkmmas.org]>
Sent: Tuesday, March 20, 2012 02:49 PM
To: MS-Exchange Admin Issues 
mailto:exchangelist@lyris.sunbelt-software.com>>
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Netmon traces? – Do you have any WAN accelerators on the network? Are the 
clients connecting with MAPI or HTTPS/RPC. It HTTPS/RPC is there a web proxy on 
the network?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Tuesday, February 28, 2012 6:45 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Outlook 2010 both in cached and non-cached mode.

Email shows up in OWA or on mobile phones prior to Outlook.

I ran Remote Connectivity Analyzer and any errors are certificate based and 
explainable, and I even pointed Exchange towards a different DC to see if that 
makes a difference and it does not seem to.

Alice

From: Michael B. Smith 
[mailto:mich...@smithcons.com]<mailto:[mailto:mich...@smithcons.com]>
Sent: Friday, February 24, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

What version(s) of Outlook?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like “batched” delivery.  In their, words, “I just had another random 
delay, this time on my own mailbox. Everything appeared fine, but then all of a 
sudden several emails all appeared at the same time that were actually 
delivered 10-15 minutes ago.”

I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative domain 
on Feb. 11th.

My understanding is that the settings in Send/Receive do NOT impact Exchange 
users, only POP and IMAP.

Any suggestions on where to start looking?

Thanks,
Alice


Alice Goodman, MCSE, LEED® AP (BD+C)
P 206.832.8295 | C 206.427.7760 | F 206.374.6814
Sr. Exchange Administrator

McKINSTRY FOR THE LIFE OF YOUR BUILDING
Consulting | Construction | Energy | Facility Services

www.mckinstry.com<http://www.mckinstry.com/>




---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscription

Re: Outlook Delays since Exchange 2010 SP2 applied

[PRamatowski]

In our case, it started spreading a bit. I made a secondary DB copy active and 
people said it stared to behave(almost immediately). Next morning I switched 
back and people started having problems again. We've got three cas boxes in the 
site, one by one I disabled them on the Kemp HLB's, stopped services and 
rebooted. Last box the RPC client service hung while shutting down, after 10 
minutes I killed the process and rebooted. Since then(24+hours), all has been 
good.

While it was hung up got a couple calls from same people having outlook 
problems saying they got NDR's to good internal recipients. Neat huh?:)

I just wish I could see, or know where to look to find an indication that that 
service on that box was the culprit

Before and after-
Nothing in event logs, BPA no problems, Exchange troubleshooting assistant 
(delays while using outlook option) showed nothing remarkable. Ran it a few 
times and it called out a few different people but people changed on different 
runs so...



Blackberry

From: KevinM [mailto:kev...@wlkmmas.org]
Sent: Tuesday, March 20, 2012 02:49 PM
To: MS-Exchange Admin Issues 
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Netmon traces? – Do you have any WAN accelerators on the network? Are the 
clients connecting with MAPI or HTTPS/RPC. It HTTPS/RPC is there a web proxy on 
the network?

From: Alice Goodman [mailto:ali...@mckinstry.com]
Sent: Tuesday, February 28, 2012 6:45 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Outlook 2010 both in cached and non-cached mode.

Email shows up in OWA or on mobile phones prior to Outlook.

I ran Remote Connectivity Analyzer and any errors are certificate based and 
explainable, and I even pointed Exchange towards a different DC to see if that 
makes a difference and it does not seem to.

Alice

From: Michael B. Smith 
[mailto:mich...@smithcons.com]<mailto:[mailto:mich...@smithcons.com]>
Sent: Friday, February 24, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

What version(s) of Outlook?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like “batched” delivery.  In their, words, “I just had another random 
delay, this time on my own mailbox. Everything appeared fine, but then all of a 
sudden several emails all appeared at the same time that were actually 
delivered 10-15 minutes ago.”

I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative domain 
on Feb. 11th.

My understanding is that the settings in Send/Receive do NOT impact Exchange 
users, only POP and IMAP.

Any suggestions on where to start looking?

Thanks,
Alice


Alice Goodman, MCSE, LEED® AP (BD+C)
P 206.832.8295 | C 206.427.7760 | F 206.374.6814
Sr. Exchange Administrator

McKINSTRY FOR THE LIFE OF YOUR BUILDING
Consulting | Construction | Energy | Facility Services

www.mckinstry.com<http://www.mckinstry.com/>




---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to listmana...@lyris.sunbeltsoftware.com
with the body: unsubscribe exchangelist

RE: Outlook Delays since Exchange 2010 SP2 applied

[KevinM]

Netmon traces? - Do you have any WAN accelerators on the network? Are the 
clients connecting with MAPI or HTTPS/RPC. It HTTPS/RPC is there a web proxy on 
the network?

From: Alice Goodman [mailto:ali...@mckinstry.com]
Sent: Tuesday, February 28, 2012 6:45 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Outlook 2010 both in cached and non-cached mode.

Email shows up in OWA or on mobile phones prior to Outlook.

I ran Remote Connectivity Analyzer and any errors are certificate based and 
explainable, and I even pointed Exchange towards a different DC to see if that 
makes a difference and it does not seem to.

Alice

From: Michael B. Smith 
[mailto:mich...@smithcons.com]<mailto:[mailto:mich...@smithcons.com]>
Sent: Friday, February 24, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

What version(s) of Outlook?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like "batched" delivery.  In their, words, "I just had another random 
delay, this time on my own mailbox. Everything appeared fine, but then all of a 
sudden several emails all appeared at the same time that were actually 
delivered 10-15 minutes ago."

I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative domain 
on Feb. 11th.

My understanding is that the settings in Send/Receive do NOT impact Exchange 
users, only POP and IMAP.

Any suggestions on where to start looking?

Thanks,
Alice


Alice Goodman, MCSE, LEED(r) AP (BD+C)
P 206.832.8295 | C 206.427.7760 | F 206.374.6814
Sr. Exchange Administrator

McKINSTRY FOR THE LIFE OF YOUR BUILDING
Consulting | Construction | Energy | Facility Services

www.mckinstry.com<http://www.mckinstry.com/>




---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to listmana...@lyris.sunbeltsoftware.com
with the body: unsubscribe exchangelist

RE: Outlook Delays since Exchange 2010 SP2 applied

[PRamatowski]

We just ran into this- random users  (30-40  out of 6700 mailboxes) spread 
across 9 DB’s on 4 different HT/MBX servers in two sites. (E2010 SP2)
Only affected cached mode people, OL 2003, 2007 and 2010.  Tried the new ost 
thing and it didn’t seem to make any difference, also tried a whole new profile.
Couldn’t find any indication of problems in Event logs, Dell OpenManage, EMC 
Performance monitor, troubleshooter, Mail flow troubleshooter... Client 
connection status was fine too.

Swapping active copies seems to fixed whatever it was but ii’s only been an 
hour or so.
Really strange.
From: Steve Goodman [mailto:st...@stevieg.org]
Sent: Wednesday, February 29, 2012 3:14 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Cheers sis ;-)

By switching over databases I mean in a Database Availability Group, when there 
are multiple copies of one database, you can switch over the database copy to 
become active on another Mailbox Server. If I recall that was a clunky 
workaround.

Steve

From: Alice Goodman [mailto:ali...@mckinstry.com]
Sent: 29 February 2012 18:40
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Yo Bro! (My brother’s name is also Steve ☺)  Been wanting to acknowledge you 
and your blog / postings for a while as I have used many of them.. ☺

Not all users had OST’s.  What do you mean by switching databases?  Just moving 
the mailbox to a different database or do you mean something more than that?

Thanks!
Alice

From: Steve Goodman 
[mailto:st...@stevieg.org]<mailto:[mailto:st...@stevieg.org]>
Sent: Wednesday, February 29, 2012 8:46 AM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

I’ve seen and heard of similar things in the past – IIRC switching databases 
over or re-creating the OST for the affected user helped. These were pre-SP2, 
though so if it’s the same issue wonder if it’s been around in one form or 
another for a while

Steve

From: Richard Stovall 
[mailto:rich...@gmail.com]<mailto:[mailto:rich...@gmail.com]>
Sent: 29 February 2012 04:08
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

Thank you.

I'm on SP2 with no Release Updates.  Perhaps I'll schedule time this weekend to 
get to RU1.


On Tue, Feb 28, 2012 at 10:59 PM, Beckers, Shawn (IT Services) 
mailto:sbeck...@csbsju.edu>> wrote:
We saw this issue as well a few times after installing Exchange 2010 SP2.  In 
our case the perceived ‘batch’ deliveries occurred after the client had been 
idle for a while and then performed an action in Outlook (switch folders, send 
a message, etc.).  The problem only effected MAPI (Outlook online and Outlook 
Anywhere clients) users.  EAS, POP/IMAP, and OWA users continued to function 
normally.  Rebooting the CAS server temporarily fixed the problem.  We 
installed RU1 for Exchange 2010 SP2 about two weeks ago and haven’t had a 
reoccurrence since.  I’m not sure if RU1 really did anything (I didn’t see 
anything for our issue in the list of fixes), but it might be worth a shot.

From: Richard Stovall [mailto:rich...@gmail.com<mailto:rich...@gmail.com>]
Sent: Tuesday, February 28, 2012 9:00 PM
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

Curiously, I had a similar report today after applying SP2 last weekend.

The report was from a user with multiple mailboxes configured in Outlook 2010.  
She stated that she never saw a particular inbound message (cached mode) in 
Outlook, but did see it in OWA.  The mailbox in question is accessed by 6 
users, all on Outlook 2010 except one who is on a Mac with Mac Outlook 2011.

The user in question was on a Mac until a few days ago, and had become 
accustomed to the vagaries of Mac Outlook 2011.  That's why she checked OWA out 
of habit.

On Tue, Feb 28, 2012 at 9:44 PM, Alice Goodman 
mailto:ali...@mckinstry.com>> wrote:
Outlook 2010 both in cached and non-cached mode.

Email shows up in OWA or on mobile phones prior to Outlook.

I ran Remote Connectivity Analyzer and any errors are certificate based and 
explainable, and I even pointed Exchange towards a different DC to see if that 
makes a difference and it does not seem to.

Alice

From: Michael B. Smith 
[mailto:mich...@smithcons.com<mailto:mich...@smithcons.com>]
Sent: Friday, February 24, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

What version(s) of Outlook?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like “batched” delivery.  In their, words, “I just had another random 
delay, this time on my own mailbox. Everything ap

RE: Outlook Delays since Exchange 2010 SP2 applied

[Steve Goodman]

Cheers sis ;-)

By switching over databases I mean in a Database Availability Group, when there 
are multiple copies of one database, you can switch over the database copy to 
become active on another Mailbox Server. If I recall that was a clunky 
workaround.

Steve

From: Alice Goodman [mailto:ali...@mckinstry.com]
Sent: 29 February 2012 18:40
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

Yo Bro! (My brother’s name is also Steve ☺)  Been wanting to acknowledge you 
and your blog / postings for a while as I have used many of them.. ☺

Not all users had OST’s.  What do you mean by switching databases?  Just moving 
the mailbox to a different database or do you mean something more than that?

Thanks!
Alice

From: Steve Goodman 
[mailto:st...@stevieg.org]<mailto:[mailto:st...@stevieg.org]>
Sent: Wednesday, February 29, 2012 8:46 AM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

I’ve seen and heard of similar things in the past – IIRC switching databases 
over or re-creating the OST for the affected user helped. These were pre-SP2, 
though so if it’s the same issue wonder if it’s been around in one form or 
another for a while

Steve

From: Richard Stovall 
[mailto:rich...@gmail.com]<mailto:[mailto:rich...@gmail.com]>
Sent: 29 February 2012 04:08
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

Thank you.

I'm on SP2 with no Release Updates.  Perhaps I'll schedule time this weekend to 
get to RU1.


On Tue, Feb 28, 2012 at 10:59 PM, Beckers, Shawn (IT Services) 
mailto:sbeck...@csbsju.edu>> wrote:
We saw this issue as well a few times after installing Exchange 2010 SP2.  In 
our case the perceived ‘batch’ deliveries occurred after the client had been 
idle for a while and then performed an action in Outlook (switch folders, send 
a message, etc.).  The problem only effected MAPI (Outlook online and Outlook 
Anywhere clients) users.  EAS, POP/IMAP, and OWA users continued to function 
normally.  Rebooting the CAS server temporarily fixed the problem.  We 
installed RU1 for Exchange 2010 SP2 about two weeks ago and haven’t had a 
reoccurrence since.  I’m not sure if RU1 really did anything (I didn’t see 
anything for our issue in the list of fixes), but it might be worth a shot.

From: Richard Stovall [mailto:rich...@gmail.com<mailto:rich...@gmail.com>]
Sent: Tuesday, February 28, 2012 9:00 PM
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

Curiously, I had a similar report today after applying SP2 last weekend.

The report was from a user with multiple mailboxes configured in Outlook 2010.  
She stated that she never saw a particular inbound message (cached mode) in 
Outlook, but did see it in OWA.  The mailbox in question is accessed by 6 
users, all on Outlook 2010 except one who is on a Mac with Mac Outlook 2011.

The user in question was on a Mac until a few days ago, and had become 
accustomed to the vagaries of Mac Outlook 2011.  That's why she checked OWA out 
of habit.

On Tue, Feb 28, 2012 at 9:44 PM, Alice Goodman 
mailto:ali...@mckinstry.com>> wrote:
Outlook 2010 both in cached and non-cached mode.

Email shows up in OWA or on mobile phones prior to Outlook.

I ran Remote Connectivity Analyzer and any errors are certificate based and 
explainable, and I even pointed Exchange towards a different DC to see if that 
makes a difference and it does not seem to.

Alice

From: Michael B. Smith 
[mailto:mich...@smithcons.com<mailto:mich...@smithcons.com>]
Sent: Friday, February 24, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

What version(s) of Outlook?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like “batched” delivery.  In their, words, “I just had another random 
delay, this time on my own mailbox. Everything appeared fine, but then all of a 
sudden several emails all appeared at the same time that were actually 
delivered 10-15 minutes ago.”

I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative domain 
on Feb. 11th.

My understanding is that the settings in Send/Receive do NOT impact Exchange 
users, only POP and IMAP.

Any suggestions on where to start looking?

Thanks,
Alice


Alice Goodman, MCSE, LEED® AP (BD+C)
P 206.832.8295 | C 206.427.7760 | F 
206.374.6814
Sr. Exchange Administrator

McKINSTRY FOR THE LIFE OF YOUR BUILDING
Consulting | Construction | Energy | Facility Services

www.mckinstry.com<http://www.mckinstry.com/>




---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an 

RE: Outlook Delays since Exchange 2010 SP2 applied

[Alice Goodman]

Yo Bro! (My brother’s name is also Steve ☺)  Been wanting to acknowledge you 
and your blog / postings for a while as I have used many of them.. ☺

Not all users had OST’s.  What do you mean by switching databases?  Just moving 
the mailbox to a different database or do you mean something more than that?

Thanks!
Alice

From: Steve Goodman [mailto:st...@stevieg.org]
Sent: Wednesday, February 29, 2012 8:46 AM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

I’ve seen and heard of similar things in the past – IIRC switching databases 
over or re-creating the OST for the affected user helped. These were pre-SP2, 
though so if it’s the same issue wonder if it’s been around in one form or 
another for a while

Steve

From: Richard Stovall 
[mailto:rich...@gmail.com]<mailto:[mailto:rich...@gmail.com]>
Sent: 29 February 2012 04:08
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

Thank you.

I'm on SP2 with no Release Updates.  Perhaps I'll schedule time this weekend to 
get to RU1.


On Tue, Feb 28, 2012 at 10:59 PM, Beckers, Shawn (IT Services) 
mailto:sbeck...@csbsju.edu>> wrote:
We saw this issue as well a few times after installing Exchange 2010 SP2.  In 
our case the perceived ‘batch’ deliveries occurred after the client had been 
idle for a while and then performed an action in Outlook (switch folders, send 
a message, etc.).  The problem only effected MAPI (Outlook online and Outlook 
Anywhere clients) users.  EAS, POP/IMAP, and OWA users continued to function 
normally.  Rebooting the CAS server temporarily fixed the problem.  We 
installed RU1 for Exchange 2010 SP2 about two weeks ago and haven’t had a 
reoccurrence since.  I’m not sure if RU1 really did anything (I didn’t see 
anything for our issue in the list of fixes), but it might be worth a shot.

From: Richard Stovall [mailto:rich...@gmail.com<mailto:rich...@gmail.com>]
Sent: Tuesday, February 28, 2012 9:00 PM
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

Curiously, I had a similar report today after applying SP2 last weekend.

The report was from a user with multiple mailboxes configured in Outlook 2010.  
She stated that she never saw a particular inbound message (cached mode) in 
Outlook, but did see it in OWA.  The mailbox in question is accessed by 6 
users, all on Outlook 2010 except one who is on a Mac with Mac Outlook 2011.

The user in question was on a Mac until a few days ago, and had become 
accustomed to the vagaries of Mac Outlook 2011.  That's why she checked OWA out 
of habit.

On Tue, Feb 28, 2012 at 9:44 PM, Alice Goodman 
mailto:ali...@mckinstry.com>> wrote:
Outlook 2010 both in cached and non-cached mode.

Email shows up in OWA or on mobile phones prior to Outlook.

I ran Remote Connectivity Analyzer and any errors are certificate based and 
explainable, and I even pointed Exchange towards a different DC to see if that 
makes a difference and it does not seem to.

Alice

From: Michael B. Smith 
[mailto:mich...@smithcons.com<mailto:mich...@smithcons.com>]
Sent: Friday, February 24, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

What version(s) of Outlook?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like “batched” delivery.  In their, words, “I just had another random 
delay, this time on my own mailbox. Everything appeared fine, but then all of a 
sudden several emails all appeared at the same time that were actually 
delivered 10-15 minutes ago.”

I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative domain 
on Feb. 11th.

My understanding is that the settings in Send/Receive do NOT impact Exchange 
users, only POP and IMAP.

Any suggestions on where to start looking?

Thanks,
Alice


Alice Goodman, MCSE, LEED® AP (BD+C)
P 206.832.8295 | C 206.427.7760 | F 
206.374.6814
Sr. Exchange Administrator

McKINSTRY FOR THE LIFE OF YOUR BUILDING
Consulting | Construction | Energy | Facility Services

www.mckinstry.com<http://www.mckinstry.com/>




---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or se

RE: Outlook Delays since Exchange 2010 SP2 applied

[Alice Goodman]

I had rebooted, and when backups failed 2 nights in a row over this past 
weekend, I ended up rebooting FE’s and BE’s yet again so hoping that will solve 
the issue.  Thanks for “confirming” that there is indeed an issue as I have not 
been able to find anything.. it’s the old, “Am I crazy”? kind of problem.

I can schedule RU1 for an update window and see if that helps as well.

Appreciate it.

Alice

From: Beckers, Shawn (IT Services) [mailto:sbeck...@csbsju.edu]
Sent: Tuesday, February 28, 2012 8:00 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

We saw this issue as well a few times after installing Exchange 2010 SP2.  In 
our case the perceived ‘batch’ deliveries occurred after the client had been 
idle for a while and then performed an action in Outlook (switch folders, send 
a message, etc.).  The problem only effected MAPI (Outlook online and Outlook 
Anywhere clients) users.  EAS, POP/IMAP, and OWA users continued to function 
normally.  Rebooting the CAS server temporarily fixed the problem.  We 
installed RU1 for Exchange 2010 SP2 about two weeks ago and haven’t had a 
reoccurrence since.  I’m not sure if RU1 really did anything (I didn’t see 
anything for our issue in the list of fixes), but it might be worth a shot.


From: Richard Stovall 
[mailto:rich...@gmail.com]<mailto:[mailto:rich...@gmail.com]>
Sent: Tuesday, February 28, 2012 9:00 PM
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

Curiously, I had a similar report today after applying SP2 last weekend.

The report was from a user with multiple mailboxes configured in Outlook 2010.  
She stated that she never saw a particular inbound message (cached mode) in 
Outlook, but did see it in OWA.  The mailbox in question is accessed by 6 
users, all on Outlook 2010 except one who is on a Mac with Mac Outlook 2011.

The user in question was on a Mac until a few days ago, and had become 
accustomed to the vagaries of Mac Outlook 2011.  That's why she checked OWA out 
of habit.

On Tue, Feb 28, 2012 at 9:44 PM, Alice Goodman 
mailto:ali...@mckinstry.com>> wrote:
Outlook 2010 both in cached and non-cached mode.

Email shows up in OWA or on mobile phones prior to Outlook.

I ran Remote Connectivity Analyzer and any errors are certificate based and 
explainable, and I even pointed Exchange towards a different DC to see if that 
makes a difference and it does not seem to.

Alice

From: Michael B. Smith 
[mailto:mich...@smithcons.com<mailto:mich...@smithcons.com>]
Sent: Friday, February 24, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

What version(s) of Outlook?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like “batched” delivery.  In their, words, “I just had another random 
delay, this time on my own mailbox. Everything appeared fine, but then all of a 
sudden several emails all appeared at the same time that were actually 
delivered 10-15 minutes ago.”

I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative domain 
on Feb. 11th.

My understanding is that the settings in Send/Receive do NOT impact Exchange 
users, only POP and IMAP.

Any suggestions on where to start looking?

Thanks,
Alice


Alice Goodman, MCSE, LEED® AP (BD+C)
P 206.832.8295 | C 206.427.7760 | F 
206.374.6814
Sr. Exchange Administrator

McKINSTRY FOR THE LIFE OF YOUR BUILDING
Consulting | Construction | Energy | Facility Services

www.mckinstry.com<http://www.mckinstry.com/>




---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist


---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
wit

RE: Outlook Delays since Exchange 2010 SP2 applied

[Steve Goodman]

I’ve seen and heard of similar things in the past – IIRC switching databases 
over or re-creating the OST for the affected user helped. These were pre-SP2, 
though so if it’s the same issue wonder if it’s been around in one form or 
another for a while

Steve

From: Richard Stovall [mailto:rich...@gmail.com]
Sent: 29 February 2012 04:08
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

Thank you.

I'm on SP2 with no Release Updates.  Perhaps I'll schedule time this weekend to 
get to RU1.


On Tue, Feb 28, 2012 at 10:59 PM, Beckers, Shawn (IT Services) 
mailto:sbeck...@csbsju.edu>> wrote:
We saw this issue as well a few times after installing Exchange 2010 SP2.  In 
our case the perceived ‘batch’ deliveries occurred after the client had been 
idle for a while and then performed an action in Outlook (switch folders, send 
a message, etc.).  The problem only effected MAPI (Outlook online and Outlook 
Anywhere clients) users.  EAS, POP/IMAP, and OWA users continued to function 
normally.  Rebooting the CAS server temporarily fixed the problem.  We 
installed RU1 for Exchange 2010 SP2 about two weeks ago and haven’t had a 
reoccurrence since.  I’m not sure if RU1 really did anything (I didn’t see 
anything for our issue in the list of fixes), but it might be worth a shot.

From: Richard Stovall [mailto:rich...@gmail.com<mailto:rich...@gmail.com>]
Sent: Tuesday, February 28, 2012 9:00 PM
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

Curiously, I had a similar report today after applying SP2 last weekend.

The report was from a user with multiple mailboxes configured in Outlook 2010.  
She stated that she never saw a particular inbound message (cached mode) in 
Outlook, but did see it in OWA.  The mailbox in question is accessed by 6 
users, all on Outlook 2010 except one who is on a Mac with Mac Outlook 2011.

The user in question was on a Mac until a few days ago, and had become 
accustomed to the vagaries of Mac Outlook 2011.  That's why she checked OWA out 
of habit.

On Tue, Feb 28, 2012 at 9:44 PM, Alice Goodman 
mailto:ali...@mckinstry.com>> wrote:
Outlook 2010 both in cached and non-cached mode.

Email shows up in OWA or on mobile phones prior to Outlook.

I ran Remote Connectivity Analyzer and any errors are certificate based and 
explainable, and I even pointed Exchange towards a different DC to see if that 
makes a difference and it does not seem to.

Alice

From: Michael B. Smith 
[mailto:mich...@smithcons.com<mailto:mich...@smithcons.com>]
Sent: Friday, February 24, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

What version(s) of Outlook?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like “batched” delivery.  In their, words, “I just had another random 
delay, this time on my own mailbox. Everything appeared fine, but then all of a 
sudden several emails all appeared at the same time that were actually 
delivered 10-15 minutes ago.”

I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative domain 
on Feb. 11th.

My understanding is that the settings in Send/Receive do NOT impact Exchange 
users, only POP and IMAP.

Any suggestions on where to start looking?

Thanks,
Alice


Alice Goodman, MCSE, LEED® AP (BD+C)
P 206.832.8295 | C 206.427.7760 | F 
206.374.6814
Sr. Exchange Administrator

McKINSTRY FOR THE LIFE OF YOUR BUILDING
Consulting | Construction | Energy | Facility Services

www.mckinstry.com<http://www.mckinstry.com/>




---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist


---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:

Re: Outlook Delays since Exchange 2010 SP2 applied

[Richard Stovall]

Thank you.

I'm on SP2 with no Release Updates.  Perhaps I'll schedule time this
weekend to get to RU1.


On Tue, Feb 28, 2012 at 10:59 PM, Beckers, Shawn (IT Services) <
sbeck...@csbsju.edu> wrote:

>  We saw this issue as well a few times after installing Exchange 2010
> SP2.  In our case the perceived ‘batch’ deliveries occurred after the
> client had been idle for a while and then performed an action in Outlook
> (switch folders, send a message, etc.).  The problem only effected MAPI
> (Outlook online and Outlook Anywhere clients) users.  EAS, POP/IMAP, and
> OWA users continued to function normally.  Rebooting the CAS server
> temporarily fixed the problem.  We installed RU1 for Exchange 2010 SP2
> about two weeks ago and haven’t had a reoccurrence since.  I’m not sure if
> RU1 really did anything (I didn’t see anything for our issue in the list of
> fixes), but it might be worth a shot.
>
> 
>
> ** **
>
> *From:* Richard Stovall [mailto:rich...@gmail.com]
> *Sent:* Tuesday, February 28, 2012 9:00 PM
> *To:* MS-Exchange Admin Issues
> *Subject:* Re: Outlook Delays since Exchange 2010 SP2 applied
>
> ** **
>
> Curiously, I had a similar report today after applying SP2 last weekend.**
> **
>
> ** **
>
> The report was from a user with multiple mailboxes configured in Outlook
> 2010.  She stated that she never saw a particular inbound message (cached
> mode) in Outlook, but did see it in OWA.  The mailbox in question is
> accessed by 6 users, all on Outlook 2010 except one who is on a Mac with
> Mac Outlook 2011.
>
> ** **
>
> The user in question was on a Mac until a few days ago, and had become
> accustomed to the vagaries of Mac Outlook 2011.  That's why she checked OWA
> out of habit.
>
> ** **
>
> On Tue, Feb 28, 2012 at 9:44 PM, Alice Goodman 
> wrote:
>
> Outlook 2010 both in cached and non-cached mode.
>
>  
>
> Email shows up in OWA or on mobile phones prior to Outlook. 
>
>  
>
> I ran Remote Connectivity Analyzer and any errors are certificate based
> and explainable, and I even pointed Exchange towards a different DC to see
> if that makes a difference and it does not seem to. 
>
>  
>
> Alice****
>
>  ****
>
> *From:* Michael B. Smith [mailto:mich...@smithcons.com]
> *Sent:* Friday, February 24, 2012 12:38 PM
> *To:* MS-Exchange Admin Issues
> *Subject:* RE: Outlook Delays since Exchange 2010 SP2 applied
>
>  
>
> What version(s) of Outlook?
>
>  
>
> *From:* Alice Goodman [mailto:ali...@mckinstry.com]
> *Sent:* Friday, February 24, 2012 2:24 PM
> *To:* MS-Exchange Admin Issues
> *Subject:* Outlook Delays since Exchange 2010 SP2 applied
>
>  
>
> I am having several users complaining about Outlook delays and what almost
> looks like “batched” delivery.  In their, words, “I just had another random
> delay, this time on my own mailbox. Everything appeared fine, but then all
> of a sudden several emails all appeared at the same time that were actually
> delivered 10-15 minutes ago.” 
>
>  
>
> I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative
> domain on Feb. 11th. 
>
>  
>
> My understanding is that the settings in Send/Receive do NOT impact
> Exchange users, only POP and IMAP. 
>
>  
>
> Any suggestions on where to start looking? 
>
>  
>
> Thanks,
>
> Alice
>
>  
>
>  
>
> Alice Goodman, MCSE, LEED® AP (BD+C)
>
> P 206.832.8295 | C 206.427.7760 | F 206.374.6814
>
> Sr. Exchange Administrator
>
>  
>
> *McKINSTRY** FOR THE LIFE OF YOUR BUILDING* 
>
> Consulting | Construction | Energy | Facility Services
>
>  
>
> www.mckinstry.com
>
>  
>
>  
>
>  
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to listmana...@lyris.sunbeltsoftware.com
> with the body: unsubscribe exchangelist
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to listmana...@lyris.sunbeltsoftware.com
> with the body: unsubscribe exchangelist
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to listmana...@lyris.sunbeltsoftware.com
> with the body: unsubscribe exchangelist
>
> ** **
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to listmana...@lyris.sunbeltsoftware.com
> with the body: unsubscribe exchangelist
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to listmana...@lyris.sunbeltsoftware.com
> with the body: unsubscribe exchangelist
>

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to listmana...@lyris.sunbeltsoftware.com
with the body: unsubscribe exchangelist

RE: Outlook Delays since Exchange 2010 SP2 applied

[Beckers, Shawn (IT Services)]

We saw this issue as well a few times after installing Exchange 2010 SP2.  In 
our case the perceived ‘batch’ deliveries occurred after the client had been 
idle for a while and then performed an action in Outlook (switch folders, send 
a message, etc.).  The problem only effected MAPI (Outlook online and Outlook 
Anywhere clients) users.  EAS, POP/IMAP, and OWA users continued to function 
normally.  Rebooting the CAS server temporarily fixed the problem.  We 
installed RU1 for Exchange 2010 SP2 about two weeks ago and haven’t had a 
reoccurrence since.  I’m not sure if RU1 really did anything (I didn’t see 
anything for our issue in the list of fixes), but it might be worth a shot.

From: Richard Stovall [mailto:rich...@gmail.com]
Sent: Tuesday, February 28, 2012 9:00 PM
To: MS-Exchange Admin Issues
Subject: Re: Outlook Delays since Exchange 2010 SP2 applied

Curiously, I had a similar report today after applying SP2 last weekend.

The report was from a user with multiple mailboxes configured in Outlook 2010.  
She stated that she never saw a particular inbound message (cached mode) in 
Outlook, but did see it in OWA.  The mailbox in question is accessed by 6 
users, all on Outlook 2010 except one who is on a Mac with Mac Outlook 2011.

The user in question was on a Mac until a few days ago, and had become 
accustomed to the vagaries of Mac Outlook 2011.  That's why she checked OWA out 
of habit.

On Tue, Feb 28, 2012 at 9:44 PM, Alice Goodman 
mailto:ali...@mckinstry.com>> wrote:
Outlook 2010 both in cached and non-cached mode.

Email shows up in OWA or on mobile phones prior to Outlook.

I ran Remote Connectivity Analyzer and any errors are certificate based and 
explainable, and I even pointed Exchange towards a different DC to see if that 
makes a difference and it does not seem to.

Alice

From: Michael B. Smith 
[mailto:mich...@smithcons.com<mailto:mich...@smithcons.com>]
Sent: Friday, February 24, 2012 12:38 PM
To: MS-Exchange Admin Issues
Subject: RE: Outlook Delays since Exchange 2010 SP2 applied

What version(s) of Outlook?

From: Alice Goodman 
[mailto:ali...@mckinstry.com]<mailto:[mailto:ali...@mckinstry.com]>
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like “batched” delivery.  In their, words, “I just had another random 
delay, this time on my own mailbox. Everything appeared fine, but then all of a 
sudden several emails all appeared at the same time that were actually 
delivered 10-15 minutes ago.”

I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative domain 
on Feb. 11th.

My understanding is that the settings in Send/Receive do NOT impact Exchange 
users, only POP and IMAP.

Any suggestions on where to start looking?

Thanks,
Alice


Alice Goodman, MCSE, LEED® AP (BD+C)
P 206.832.8295 | C 206.427.7760 | F 
206.374.6814
Sr. Exchange Administrator

McKINSTRY FOR THE LIFE OF YOUR BUILDING
Consulting | Construction | Energy | Facility Services

www.mckinstry.com<http://www.mckinstry.com/>




---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist


---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com>
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to listmana...@lyris.sunbeltsoftware.com
with the body: unsubscribe exchangelist

Re: Outlook Delays since Exchange 2010 SP2 applied

[Richard Stovall]

Curiously, I had a similar report today after applying SP2 last weekend.

The report was from a user with multiple mailboxes configured in Outlook
2010.  She stated that she never saw a particular inbound message (cached
mode) in Outlook, but did see it in OWA.  The mailbox in question is
accessed by 6 users, all on Outlook 2010 except one who is on a Mac with
Mac Outlook 2011.

The user in question was on a Mac until a few days ago, and had become
accustomed to the vagaries of Mac Outlook 2011.  That's why she checked OWA
out of habit.

On Tue, Feb 28, 2012 at 9:44 PM, Alice Goodman  wrote:

>  Outlook 2010 both in cached and non-cached mode.
>
> ** **
>
> Email shows up in OWA or on mobile phones prior to Outlook. 
>
> ** **
>
> I ran Remote Connectivity Analyzer and any errors are certificate based
> and explainable, and I even pointed Exchange towards a different DC to see
> if that makes a difference and it does not seem to. 
>
> ** **
>
> Alice
>
> ** **
>
> *From:* Michael B. Smith [mailto:mich...@smithcons.com]
> *Sent:* Friday, February 24, 2012 12:38 PM
> *To:* MS-Exchange Admin Issues
> *Subject:* RE: Outlook Delays since Exchange 2010 SP2 applied
>
> ** **
>
> What version(s) of Outlook?
>
> ** **
>
> *From:* Alice Goodman [mailto:ali...@mckinstry.com]
> *Sent:* Friday, February 24, 2012 2:24 PM
> *To:* MS-Exchange Admin Issues
> *Subject:* Outlook Delays since Exchange 2010 SP2 applied
>
> ** **
>
> I am having several users complaining about Outlook delays and what almost
> looks like “batched” delivery.  In their, words, “I just had another random
> delay, this time on my own mailbox. Everything appeared fine, but then all
> of a sudden several emails all appeared at the same time that were actually
> delivered 10-15 minutes ago.” 
>
>  
>
> I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative
> domain on Feb. 11th. 
>
>  
>
> My understanding is that the settings in Send/Receive do NOT impact
> Exchange users, only POP and IMAP. 
>
>  
>
> Any suggestions on where to start looking? 
>
>  
>
> Thanks,
>
> Alice
>
>  
>
>  
>
> Alice Goodman, MCSE, LEED® AP (BD+C)
>
> P 206.832.8295 | C 206.427.7760 | F 206.374.6814
>
> Sr. Exchange Administrator
>
>  
>
> *McKINSTRY** FOR THE LIFE OF YOUR BUILDING* 
>
> Consulting | Construction | Energy | Facility Services
>
>  
>
> www.mckinstry.com
>
>  
>
>  
>
>  
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to listmana...@lyris.sunbeltsoftware.com
> with the body: unsubscribe exchangelist
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to listmana...@lyris.sunbeltsoftware.com
> with the body: unsubscribe exchangelist
>
> ---
> To manage subscriptions click here:
> http://lyris.sunbelt-software.com/read/my_forums/
> or send an email to listmana...@lyris.sunbeltsoftware.com
> with the body: unsubscribe exchangelist
>

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to listmana...@lyris.sunbeltsoftware.com
with the body: unsubscribe exchangelist

RE: Outlook Delays since Exchange 2010 SP2 applied

[Michael B. Smith]

What version(s) of Outlook?

From: Alice Goodman [mailto:ali...@mckinstry.com]
Sent: Friday, February 24, 2012 2:24 PM
To: MS-Exchange Admin Issues
Subject: Outlook Delays since Exchange 2010 SP2 applied

I am having several users complaining about Outlook delays and what almost 
looks like "batched" delivery.  In their, words, "I just had another random 
delay, this time on my own mailbox. Everything appeared fine, but then all of a 
sudden several emails all appeared at the same time that were actually 
delivered 10-15 minutes ago."

I did 2 things recently, put SP2 on Feb. 3rd and added an authoritative domain 
on Feb. 11th.

My understanding is that the settings in Send/Receive do NOT impact Exchange 
users, only POP and IMAP.

Any suggestions on where to start looking?

Thanks,
Alice


Alice Goodman, MCSE, LEED(r) AP (BD+C)
P 206.832.8295 | C 206.427.7760 | F 206.374.6814
Sr. Exchange Administrator

McKINSTRY FOR THE LIFE OF YOUR BUILDING
Consulting | Construction | Energy | Facility Services

www.mckinstry.com




---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to 
listmana...@lyris.sunbeltsoftware.com
with the body: unsubscribe exchangelist

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to listmana...@lyris.sunbeltsoftware.com
with the body: unsubscribe exchangelist