Hello folks,
Recently I have in my station a TS-790 for satellites. In the past the radio
used for this activity was a IC-821. On that radio, for sat activity, is
suggested to use the main band for downlink reception and the sub band for the
uplink. This because the reception in main band is
Hi Mario,
I'm using this radio for satellites since 1998.
It's work great without problem at all.
73
Francesco IW4DVZ
-Messaggio originale-
Da: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] Per conto di
Mario Manissero
Inviato: lunedì 26 ottobre 2009 14.32
A:
Yes, Dan,
I did get that bit.
The other half of the twisted pair is GM1SXX, IT engineer by trade and
software guru.
If my proposal does bear fruit, would you be interested in giving D-Rats a
haircut?.
(read: produce a dedicdated cut-down 'space' version).
As per today, we're
Hello Mario,
For the TS-790, the MAIN band transmits and receives. The SUB band is
receive ONLY.
So, for TS-790 satellite operations, you should use:
MAIN band for Transmitting
SUB band for Receiving
It's a very nice radio for satellite operations! I hope you enjoy it.
73,
Mark N8MH
Because we asked that we be treated in exactly the manner you described
and were rebuffed.
Bob
John P. Toscano wrote:
Bob McGwier wrote:
ANY aspect dealing with a satellite, software, hardware, ground
stations (hardware, software, protocols, etc.), ideas, random
ejaculations from a
On Sun, Oct 25, 2009 at 8:38 PM, Bill Ress b...@hsmicrowave.com wrote:
This continues to be a real sore spot with
University research programs on things related to satellites or any of
the areas subject to ITAR. It's get especially tricky when students,
which are foreign nationals, try to
Hi Samudra,
No, it's not a doom and gloom attitude anymore within AMSAT-NA. We
understand more today than we did two years ago. It's just that most
AMSAT-NA satellite builders were unaware of ITAR issues related to
satellites, and just what can and cannot be done to be compliant. Export
Hello George,
Thanks for the reply.
Maybe I can go for FOD-track. I even have the pcb that was given to me
years ago and it's more fun if I build it myself.
But can I just connect it and let it communicate with HamRadio Deluxe or
do I need to run another program?
73,
ON4HF.
Eric Knaps
On Mon, Oct 26, 2009 at 5:24 PM, Bill Ress b...@hsmicrowave.com wrote:
But ALL US citizens and foreign permanent residents must be very careful
about the more sinister part of ITAR called DEEMED EXPORTS. That's where you
discuss certain ITAR controlled satellite hardware or technology issues
- Original Message -
From: Mario Manissero mario.maniss...@yahoo.it
To: AMSAT-BB@amsat.org
Sent: Monday, October 26, 2009 2:32 PM
Subject: [amsat-bb] TS-790 and sat comunication
Hello folks,
Recently I have in my station a TS-790 for satellites. In the past the
radio used for this
At 08:37 AM 10/27/2009, Samudra Haque wrote:
Yes, I usually take care to divide my correspondence amongst the
particular groups I am working with, and this is also the basis in
which I recently proposed moving to (a) moderated forum (such as
phpBB) or (b) sub-dividing the amsat-bb list into
Hi Samudra,
Hey - don't worry about ruffling feathers. The more we discuss it, the
better understood ITAR will be.
Regards...Bill - N6GHz
Samudra Haque wrote:
On Mon, Oct 26, 2009 at 5:24 PM, Bill Ress b...@hsmicrowave.com wrote:
But ALL US citizens and foreign permanent residents must be
At 09:31 AM 10/27/2009, Samudra Haque wrote:
With a forum, you can unclutter your mailbox, and also the forum
system can always tag messages according to a timeline/subject/thread
whatsoever, so if you are really busy (are we not all busy ... its a
hobby of course) then just wait to log on, and
Call for Papers 14th Annual Southeastern VHF
Society Conference April 23rd and 24th, 2010
Morehead State University in Morehead, Kentucky
The Southeastern VHF Society is calling for the
submission of papers and presentations for the
upcoming 14th Annual Southeastern VHF Society
Conference to
Is W6FOG in route to Puerto Vallarta ??
If yes when will arrive here ??
Many thanks in advance
Al XE2AT
_
Si no está en Windows Live, nunca pasó
http://www.actualizatuperfil.com.mx/
On for 20:45 and 22:25 utc passes. Early one was max elevation of 15
degrees
next one nearly overhead pass. Receiving with 52 turn helix with cup
reflector
No signal background noise is S1. Max sig on 15 degree el pass was S6 and on
near overhead was S9 + 10db. Had 2 QSOs on low pass and 4
I tried a test on the last pass that was from horizon to 80 degrees. I
have a BBQ dish that is mounted horizontally and could barely hear the pass
until it was almost over head. On the 27 turn helix, I head the signals at
about S5 at 10 degrees and S9+ from 20 degrees until maximum.
is this
Call for Papers 14th Annual Southeastern VHF
Society Conference April 23rd and 24th, 2010
Morehead State University in Morehead, Kentucky
The Southeastern VHF Society is calling for the
submission of papers and presentations for the
upcoming 14th Annual Southeastern VHF Society
Conference to
8 turn helix on K5GNA D/C, with 40' run of 9913 to FT736 ( my 2.4 and 1.2
GHz setup ) gave same audio performance at the 435.300 on the FT847 with
preamp - excellent signal on both, full quite most of the time when
receiving.
http://picasaweb.google.com/ve4yz.alan/VE4YZ#5202556475297897490 this
Has anyone got this configuration working? My current setup is:
Yaesu FT-736, WISP, Kansas City Tracker/Tuner with Yaesu 5400 rotor control
box.
I have try to use Satpc32 with the KCT and it will interface with the rotor
control, but will not tune the radio.
Do I need a separate
The EM97 grid operation on 24 October came off as planned.
The operating location proved to be quite good. The lowest
western AO-27 pass was only 8 degrees and I was able to hear
the entire 7 minutes of it. The last pass of AO-51 at 2338z
was the most difficult because of the many competing
Hi Jim, SATPC32 will run the FT736r directly using a serial port or a
USB/Serial adapter to the 6 pin DIN CAT port on the radio. However, the
cable must include a TTL/Serial converter. Page 13 of my FT736r manual
using GND, S.IN only If you are already running directly from PC to Radio
with
Hi Rodney!
i would like to thank all those that worked me on the trip to Huron, SD EN04,
sorry the grid combination EN04/14 location that was scouted did not work out,
the area was very muddy and the approaches were not favorable,
there was also a digital link that was interfering with my
23 matches
Mail list logo