Looking for a bellhousing part #3858403. If anyone
can help please let me know.
Thanks!
Jim
'66 Malibu
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of J. Brady
Sent: Tuesday, May 01, 2007 2:18 PM
To: Chevelle Group
Subject: [Chevelle-list] bellhousing needed
Looking for a bellhousing part #3858403. If anyone
can help please let me know.
Thanks!
Jim
'66 Malibu
I already ordered the bellhousing today, your truck bellhousing is it a 661??
If you wait some guy next week wants my 350 engine if he doesn't take the brackets which I think he will not, then I will be glad to sell you my brackets
Joe P.
Joe, I don't know the number of the bellhousing but it came off a 79 C10. Sounds good on the brackets, let me know. Carl
New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.
Carl,
Any #'s stamped on the Bellhousing?
Joe
Joe, no numbers that I see unless I am not looking in the right place. I can tell you the flywheel that was on the truck was a 14". I have the complete shot clutch, pressure plate and flywheel on a shelf with the bellhousing. Hope that helps. Carl
Blab-away for as little as 1¢/min. Make
I sent you
an e-bay listing that has very good pictures for what your are looking for.
-Original
Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On
Behalf Of [EMAIL PROTECTED]
Sent: Thursday, May 11, 2006 1:38
AM
To: Chevelle-list@chevelles.net
Subject: [Chevelle-list
Sent: Thursday, May 11, 2006 12:37
AM
Subject: [Chevelle-list] Bellhousing
question
Last night I was ready to install my BB finally into my 69 Chevelle, come
to find out that the bellhousing does not fit (TOO SMALL) I had this
bellhousing off my 350 which fit with the old
: [Chevelle-list] Bellhousing question
You can use the truck bellhousing (much cheaper) and get a spacer for the transmission bearing retainer. I got one from the following and it works great!
Dennis Wayne McLeodToolcraft Co., Inc.Cell 502-558-1043Office 502-222-5764FAX 502-222-5942
I think
Joe, I will trade you even up a truck bellhousing for the AC bracket you have that I need. Let me know.
How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.
Does anyone on the list know who makes an adapter
ring to fit large hole housing with small bearing retainer transmissions?
I read somewhere that someone was doing this and need to get in touch. Any
help appreciated.
John
I have a bellhousing #460486 I was told it was a
truck bellhousing ,but I would like to use it in my 72.with an 11'' inch
clutch.is there any reason why I can't or shouldn't use it? thanks
Jimmy.C
- Original Message -
From:
Bill
Lessenberry
To: The Chevelle Mailing
From: Michael Pell [EMAIL PROTECTED]
Date: 2005/05/09 Mon PM 06:07:48 EDT
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] BELLHOUSING
No, the truck bell won't work directly. You'll for sure need an adapter ring.
What's bigger?
The big hole that front
[EMAIL PROTECTED]:
From: Michael Pell [EMAIL PROTECTED]
Date: 2005/05/09 Mon PM 06:07:48 EDT
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] BELLHOUSING
No, the truck bell won't work directly. You'll for sure need an
adapter ring.
What's bigger
THANKS MIKE. JIMMY.C
- Original Message -
From: Michael Pell [EMAIL PROTECTED]
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Sent: Tuesday, May 10, 2005 9:15 AM
Subject: Re: [Chevelle-list] BELLHOUSING
The typical pick-up truck (1/2 ton, 3/4 ton) with a 4sp behind
@chevelles.net
Sent: Tuesday, May 10, 2005 9:15 AM
Subject: Re: [Chevelle-list] BELLHOUSING
The typical pick-up truck (1/2 ton, 3/4 ton) with a 4sp behind a
typical SBC/BBC have a larger bearing retainer opening (5)
compared to
the cars (4 5/8).
http://www.5speedtransmissions.com
: Michael Pell [EMAIL PROTECTED]
Date: 2005/05/10 Tue AM 09:15:12 EDT
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] BELLHOUSING
The typical pick-up truck (1/2 ton, 3/4 ton) with a 4sp behind a
typical SBC/BBC have a larger bearing retainer opening (5
in bellhousing.
Maybe I should look for that.
Might be that behind a 250 they didn't bother with a big
housing.
Pete
From: Michael Pell [EMAIL PROTECTED]
Date: 2005/05/10 Tue AM 09:15:12 EDT
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Subject: Re: [Chevelle-list
Does anyone know if a truck bellhousing cast #
6263756 will work in a 72 chevelle with a Muncie ? I have a 14" flywheel with an
11" clutch and the #621's are hard to come by for reasonable $$. thanks for any
help. Jimmy.C
No, the truck bell won't work directly. You'll for sure need an
adapter ring.
Here's some more info:
http://www.5speedTransmissions.com/techref.html
See item #30, and notice the 2 links.
McLeod does sell and adapter ring, but your bearing retainer will require some machining to create a
, May 09, 2005 2:20 PMTo:
Chevelle-list@chevelles.netSubject: [Chevelle-list]
BELLHOUSING
Does anyone know if a truck bellhousing cast #
6263756 will work in a 72 chevelle with a Muncie ? I have a 14" flywheel with
an 11" clutch and the #621's are hard to come by
.
CO
- Original Message -
From:
Brad Waller
To: 'The Chevelle Mailing List'
Sent: Monday, May 09, 2005 6:24 PM
Subject: RE: [Chevelle-list]
BELLHOUSING
The 6263756 is a 12" truck
housing. The transmission may not bolt up to that one! You want
a3872444, 38
2003 01:52
To: 'The Chevelle Mailing List'
Subject: RE: [Chevelle-list]
bellhousing
Ok. Edmond is just up the road. You can see everything
off the car at http://www.dalesplace.com/forsale/trans.htm.
I missed getting a few bolts (trans to bellhousing comes to mind). All
it's really missing
Specific Midwest Chevelles Midwest Chevelle Show Information
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
TigerguttSent: Tuesday, October 07, 2003 11:31 AMTo:
'The Chevelle Mailing List'Subject: RE: [Chevelle-list]
bellhousing
Dale
Title: RE: [Chevelle-list] bellhousing
Dang. If you were pretty close to Oklahoma, you wouldn't have to round up much at all. I just took my 4-speed out of my 67 SS and am selling it all - M20, Hurst, pedals, flywheel, clutch/disc, fork, bellhousing...everything.
Dale McIntosh
TC Gold #92
Title: RE: [Chevelle-list] bellhousing
u Dale, email me, I'm in Edmond and might be
interested.
Bill B.67 MalibuEdmond Oklahomahttp://groups.msn.com/SpidrManspics/mycar.msnwhttp://autos.groups.yahoo.com/group/chevellerestoration/
- Original Message -
From:
Dale McIntosh
To: 'The Chevelle Mailing List'
Sent: Sunday, October 05, 2003 2:24
PM
Subject: RE: [Chevelle-list]
bellhousing
Dang. If you were pretty
close to Oklahoma, you wouldn't have to round up much at all. I just
took my 4-speed out of my 67 SS and am selling it all
Are all chevy bellhousings the same for big
blocks or small blocks? I want to change from an
auto to a 4 speed and am rounding up parts. It
will be going in a 67 chevelle ss396. What
casting numbers do I look for?
__
Do you Yahoo!?
The New Yahoo! Shopping - with
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, October 04, 2003 8:54 AM
Subject: [Chevelle-list] bellhousing
Are all chevy bellhousings the same for big
blocks or small blocks? I want to change from an
auto to a 4 speed and am rounding up parts. It
will be going in a 67 chevelle ss396
Ron,
I have them somewhere but dont where I thought they where so I'll see if I
can find them and get back to you.
Kind Regards
André
- Original Message -
From: Cutter169 [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, February 02, 2003 6:05 AM
Subject: [Chevelle-List] Bellhousing
Ron,
I have been looking until now but I cant find the bolts. I'm sorry !
Kind Regards
André
- Original Message -
From: Cutter169 [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, February 02, 2003 6:05 AM
Subject: [Chevelle-List] Bellhousing bolt question
Anyone happen to know
Subject: Re: [Chevelle-List] Bellhousing bolt question
Anyone happen to know what the size/length the four bolts are that go
into
a bellhousing from a muncie 4 speed?
thanks
Ron
My '66 http://home.attbi.com/~cutter169/chevelle_page.htm
Team Chevelle #1668
ACES #5205
Of Herbert Lumpp
Sent: Sunday, February 02, 2003 5:01 PM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-List] Bellhousing bolt question
Ron,
The bolts are 1/2 course thread, and 1.5 long measuring from under the
head.
cYa-
Herb Lumpp
1966 El Camino
ACES 3509, MCC 528
http://users.adelphia.net
Anyone happen to know what the size/length the four bolts are that go into
a bellhousing from a muncie 4 speed?
thanks
Ron
My '66 http://home.attbi.com/~cutter169/chevelle_page.htm
Team Chevelle #1668
ACES #5205
-
To Unsubscribe please
Josh
This site has some bellhousing numbers listed. It has the 486 listed as a 12
truck bellhousing.
http://www.tracyvette.com/bellhousings.html
-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to:
Thanks! ANd Thanks Steve for your info as well. Learn something new every
day!
Josh Gin (NoNeck) Visit my Chevelle website www.NoNecksChevelle.com
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, August 17, 2002 5:36 AM
Subject: Re: [Chevelle-List
I am cleaning out my garage because we are moving, and I'm listing a bunch
of stuff on Ebay. I am getting rid of an aluminum bellhousing that I had on my
454 with 11 inch clutch. All the ones on ebay are 681's, but this is part number
460486. Anybody know anyhting about this bell? I thought
In a message dated 08/16/2002 12:42:54 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
All the ones on ebay are 681's, but this is part number 460486. Anybody
know
anyhting about this bell? I thought only the 681's were for the big clutch,
but this one looks almost identical to the
PROTECTED]
Sent: Friday, August 16, 2002 7:03 PM
Subject: Re: [Chevelle-List] Bellhousing question...
In a message dated 08/16/2002 12:42:54 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
All the ones on ebay are 681's, but this is part number 460486. Anybody
know
anyhting about this bell
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of NoNeck
Sent: Friday, August 16, 2002 10:39 PM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-List] Bellhousing question...
Duh. Yeah, I did mean the 621 Kurt. The auction you sent mentions that
it won't fit a M
40 matches
Mail list logo