I searched the CCO and I can't find anything in the documentation about this
vacation thing. What is the part number for that? Is there a certification
associated with the configuration of a 'vacation'? What release are we up
to?
TTFN,
Bill in Anchorage
-Original Message-
From:
Hi
I was studying the InterVlan routing documents and I got to some questions.
In a scenario like the attached file:
1. How does the external Router decide how to route the packets between the
VLANs, is the INTERVLAN routing based on the IP address assigned to
sub-inteface?
2. In these
Hello Erick ,
Thanks for your response ...this Ethernet Interface i am talking about which
is having the problem is connected to Layer 4 Alteon Switch .
Any takers for this.
Thanks in advance.
Vijendra
Erick B. wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Some ideas for
Answer Inline
Hi
I was studying the InterVlan routing documents and I got to some
questions.
In a scenario like the attached file:
1. How does the external Router decide how to route the packets between
the
VLANs, is the INTERVLAN routing based on the IP address assigned to
Dear All,
My interface show serial up,line protocol up.But when i do show x25 vc i
dont see end to end x25 link ,what could be the cause is it linked to BW or
something .Btw Lapb status shows connect .
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=16448t=16448
Hey there, Tom:
You don't need to do this with BGP (since you're not multi-homed). You can
just use static routes and set the metrics so that when one fails, the other
picks it up.
:-{)]
Mark A. Morenz, MS Ed, CCNA, CCAI
Message Posted at:
This is an automated response from the Mailer Daemon
You recently sent an item of mail to [EMAIL PROTECTED]
The
Hello everybody.
Not long after I hooked up to the internet with my DSL connection, I
suffered a
security breach due to a persistant internet worm. Here is some info on what
I
found out about it through removing it from my system:
Bymer worm/backdoor program info:
- Infects Shared Folders in
Keep in mind that one routes between IP subnets, not VLANs. VLANs are a
layer two concept. From there you should be able to answer you own first
question. In the second case, given IP subnets have unique ranges, only on
PC will be on the valid subnet and hence be able to communicate to the rest
Hi
Does anyone know if it is possible to set up a VPN using either Windows 2000
or Millennium to connect to a corporate PIX without using any Cisco client
software?
I believe it is possible but haven't had any luck in getting it to work.
I have it working great using NT with the Cisco Secure
Yes, PIX supports PPTP acording to CCO. However, I became frustrated with
PPTP as each version of Windows offers different options and interacts with
the PIX in a different manner. In other words, I have set this up and made
it work most of the times I tried, but this one time, in band camp
CPU utilization for five seconds: 99%/3%; one minute: 99%; five minutes: 99%
PID Runtime(ms) Invoked uSecs5Sec 1Min 5Min TTY Process
2318762964280084 66991 81.81% 92.45% 92.58% 0 IP Input
it makes my network so slow,how can I resolve the problem?
thanks
Message Posted
I think I remember something on this from quite a while back. This is either
a new version of it or this worm is close to a year old. Anyway, file and
print sharing is dissabled by default. Any users that don't know better than
to enable full access to C$ and not at least password protect it
looks like you've got the code red worm running wild on your network.
Refer to:
http://www.cisco.com/warp/customer/63/ts_codred_worm.shtml
- Original Message -
From: cslx
To:
Sent: Saturday, August 18, 2001 9:56 PM
Subject: please tell me what is ip input process?it cost me more than
Can you post your config (clean up IP info)?
--- Ron Tan wrote:
looks like you've got the code red worm running wild
on your network.
Refer to:
http://www.cisco.com/warp/customer/63/ts_codred_worm.shtml
- Original Message -
From: cslx
To:
Sent: Saturday, August 18, 2001
Hello All,
Having passed my lab exam I am looking to sell the following equipment:
2511 with 16MB/16MB - 2 octal cables (total 16 async lines), 1 Ethernet
(includes Trans.), 2 Serials
2503 with 16MB/16MB - 1 Ethernet (with Trans.), 2 Serials, 1 BRI (includes
Motorola NT1).
4000M with 8
Would it at least state in the braces that this question has multiple
answers?
Rayappa.
-Original Message-
From: Saleem Nathoo [mailto:[EMAIL PROTECTED]]
Sent: Thursday, April 26, 2001 10:55 PM
To: [EMAIL PROTECTED]
Subject: RE: CCIE Written Exam [7:2137]
Hi,
It does not
Congratulations John
(Now, go and try and find where you left your life !!!)
VERY respectfully,
Tony M.
#6172
- Original Message -
From: Jon Mendoza
To:
Sent: Saturday, August 18, 2001 9:32 AM
Subject: Passed Lab Exam! [7:16459]
Hello All,
Having passed my lab exam I am
SAN Consultant
SAN and Storage Architects! Come work in an Exciting, Cutting Edge
environment for the fastest-growing company in the Outsourced Data Storage
Services space! As the SAN Architect, you will be responsible for the
day-to-day operation of the data storage system, including
Jon,
Congrats on getting your CCIE :)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=16463t=16459
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Does anyone have any idea what the current delay is like for scheduling the
lab (anywhere in the western hemisphere)? I passed the written recently,
but my info is not available online yet (otherwise I would check there). I
imagine that the delay is at least six months, but thought that things
At 03:55 AM 8/18/01, Hamid wrote:
Hi
I was studying the InterVlan routing documents and I got to some questions.
In a scenario like the attached file:
1. How does the external Router decide how to route the packets between the
VLANs, is the INTERVLAN routing based on the IP address assigned to
IP input being high could be a symptom of Code Red.
I have also seen ip input get really high due to IP fragmentation. Do you
have your mtu set too high? Do other devices communicating through the
router have the mtu set too high?
Have you searched on ip input at Cisco's site?
One simple
San Jose is scheduling in April 2002 I believe.. but this should be
alleviated by
the one day lab.
Jon
Glenn Johnson wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does anyone have any idea what the current delay is like for scheduling
the
lab (anywhere in the western
Steve give me a call! on my cell or email me [EMAIL PROTECTED]
Steve Sewa wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Jon,
Congrats on getting your CCIE :)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=16467t=16459
It has been a while since I sat the written. If I remember correctly, the
tricky part was select the correct answers. The operative word answers
being plural. It could be one, two, three
You either know it or you don't.
-Original Message-
From: Rayappa Mayakunthala [mailto:[EMAIL
Hi group
I am setting up a network with some NT4 servers, a Catalyst 2948 switch ,
and a 7204 VXR router and some access servers. The network consists of 7
VLANs, and all the servers and routers are on multi-VLAN or TRUNK interfaces
on the switch. The LAN consists of many computers with
May be 2 or 3 questons
- Original Message -
From: Wright, Jeremy
To: 'Ola Shusi'
Sent: Thursday, August 16, 2001 2:17 PM
Subject: RE: CCIE Written [7:15832]
Did you get any AppleTalk questions? Thanks.
-Original Message-
From: Ola Shusi [mailto:[EMAIL PROTECTED]]
Hi group
I am setting up a network with some NT4 servers, a Catalyst 2948 switch ,
and a 7204 VXR router and some access servers. The network consists of 7
VLANs, and all the servers and routers are on multi-VLAN or TRUNK interfaces
on the switch. The LAN consists of many computers with
Hi all,
Please forgive the post, but I am looking to sell (US$450) or trade my
WIC-1DSU-T1 (unused) plus cash for a NM-4T.
I am in London, England, not much call for T1 over here.
Please email me off list if you are interested, [EMAIL PROTECTED]
Cheers,
Symon
Message Posted at:
try musiciansfriends.com they have a 8U rack for $19.
Ray Smith wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Anyone with a used 19 Network Rack in good condition to unload at a
reasonable price, preferable in the New York/NJ area for the purpose of
saving on shipping
It depends on the kind of environment you have and how much control you
have - that is to say, do people who break the rules get in trouble or just
get their hands slapped? (or nothing)
Anyway, DHCP will definitely fix this problem but only if users don't change
the IP configuration on their
Hi Group,
I will be done with my CCNP in a month and I am looking forward to achieving
CCIE written (Switching). What Cisco course beyond CCNP will help me with
the CCIE wirtten.
Any information will be highly appreciated.
Thanks
L. W.
Message Posted at:
In a message dated 8/18/01 1:12:59 PM Central Daylight Time,
[EMAIL PROTECTED] writes:
Subj: Lab scheduling ? [7:16464]
Date: 8/18/01 1:12:59 PM Central Daylight Time
From: [EMAIL PROTECTED] (Glenn Johnson)
Sender:[EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED] (Glenn Johnson)
remove and reinsert it while the router is powered up.
Cooper, David wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
What version of IOS?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:ICPPhila_Email_Re [EMAIL PROTECTED]]
Sent: Wednesday, August 15, 2001 8:04 AM
See if this works(watch wrap):
http://www.west-
point.org/users/usma1983/40768/chesinc/images/Dout354.exe
HTH,
Paul Werner
Date: Fri, 17 Aug 2001 17:20:53 -0400
From: [EMAIL PROTECTED]
Subject: Dial-out Software for MICA Modems [7:16424]
Cisco had dial a dial out utility that would let
Kent,
You seem to be quite an authority on Jeff and his work habits. There
are many reasons for taking on a coauthor, and they often have to do
with producing better quality, not could not finish by himself.
You also don't know his responsibilities at Juniper and how he split
his time among
I am located in Hackensack,NJ and passed my CCIE Written Exam.
I also have CCNP, CCNA, MCSE+I and 5 years industry experience.
I have All most important cisco Training+Testing Material including PPTs,
Study Guides, Books, Electrnic books and other related material.
I am looking any serious
Forgot to add, unless you are lucky enough to be running IOS 12.1 and above,
forget about NBAR and do it the hard way.
Cheers.
- Original Message -
From: Erick B.
To: Ron Tan ;
Sent: Saturday, August 18, 2001 11:32 PM
Subject: Re: please tell me what is ip input process?it cost me
This was how I tackled it:
1) Create an access-list that blocks traffic from coming into tcp port 80
ip access-list extended deny-port-80
deny tcp any any eq 80
permit ip any any
2) Apply the access-list onto all your router's interfaces for incoming
traffic
ip
Depends on what you are using it for. It can do a lot of different things.
The main gotcha is that it can not handle password changes very well.
Stepp Harless wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does anyone have any experience good or bad with Cisco Secure Access
Howard,
I think you misunderstood and overreacted.
I definitely respect Jeff Dolye and his co-auther a lot!!
I did not even try to do those things you mentiond in your email.
If it is not joke to you, it must be my bad.
I hope you are not implying Jeff Doyle is not a better writter than his
How about ATM ,VoIP equipment or catalyst 5K equipment?
Jon Mendoza wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello All,
Having passed my lab exam I am looking to sell the following equipment:
2511 with 16MB/16MB - 2 octal cables (total 16 async lines), 1 Ethernet
43 matches
Mail list logo