Hi,
When I was upgrading the IOS on a 2514 router via tftp, the connection was
lost while the router was trying to download the new ios from the tftp
server(after having erased the existing ios!!). The router retried a couple
of times and I was finally forced to reboot the router. The routers n
sounds like a job for xmodem and a few hours of your time worrying if the
power will go off:).
-Original Message-
From: Niraj Palikhey [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 27, 2001 3:45 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: 2514 Upgrade Problem!!
Hi,
When I
1)make sure you save your running configuration before you perform
upgrading
2) Valid connectivity to TFTP
3) In boot mode that you still can upgrade IOS into your router.
""Niraj Palikhey"" <[EMAIL PROTECTED]> ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
> When I
in router boot mode, last time i checked, you still could do a normal tftp
file transfer.
Try it again.
-Original Message-
From: Niraj Palikhey [mailto:[EMAIL PROTECTED]]
Sent: 27 March 2001 07:45
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: 2514 Upgrade Problem!!
Hi,
When I was
If I remember correctly, in that mode on a 2500 series router, routing
is disabled. If your TFTP server is not directly attached to the
ethernet port then you need to set a default gateway using the "ip
default-gateway" command to provide connectivity to the network. If you
can ping your TFTP se
uot;John Neiberger" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>CC: [EMAIL PROTECTED]
>Subject: Re: 2514 Upgrade Problem!!
>Date: Tue, 27 Mar 2001 08:08:08 -0700
>
>If I remember correctly, in that mode on a 2500 series router, routing
>is disabled. If your TFTP s
Jason Baker <[EMAIL PROTECTED]>
>Reply-To: Jason Baker <[EMAIL PROTECTED]>
>To: "'Niraj Palikhey'" <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
>Subject: RE: 2514 Upgrade Problem!!
>Date: Tue, 27 Mar 2001 16:57:42 +1000
>
>sounds like a job for xmod
ikhey [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 27, 2001 11:34 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED];
[EMAIL PROTECTED]
Subject: RE: 2514 Upgrade Problem!!
Hi Jason,
I would love to do the xmodem(after having done on a couple of 36 and 2600
series) but my problem is that I have never
e I am able to ping-if that's possible?)
I am also doing a search on CCO but am not having much luck.
Please advise.
Thank you.
Kind regards,
[EMAIL PROTECTED]
>From: "John Neiberger" <[EMAIL PROTECTED]>
>Reply-To: "John Neiberger" <[EMAIL PROTECTED]>
I've just upgraded new (empty) flash sticks on a 2500 via directly connected
tftp server using standard copy tftp flash.
Remember the initial ping sequence may fail and usually does.
Make sure you've done a no shut on interface.
Sorry if I'm teaching you to suck eggs. Can't think of any other reas
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, March 27, 2001 5:57 AM
Subject: RE: 2514 Upgrade Problem!!
> sounds like a job for xmodem and a few hours of your time worrying if the
> power will go off:).
>
>
>
> -Original Message-
> From: Niraj Palikhey [
the ether port is the key issue, if tftp server is reached via ether
thatll work, if u need to go over the serial port to get to the tftp
server, crash bomb fail..
Bri
On Tue, 27 Mar 2001, John Neiberger wrote:
> If I remember correctly, in that mode on a 2500 series router, routing
> i
In my experience that hasn't been the case. Just a year ago we had to
upgrade 90 2500 series routers over wan links and didn't have a problem. It
was a little tricky, sure, but it works. The trick there is to set the
default gateway first and then change the configuration register to boot
into
: Niraj Palikhey [mailto:[EMAIL PROTECTED]]
Sent: 27 March 2001 18:26
To: [EMAIL PROTECTED]
Subject: RE: 2514 Upgrade Problem!!
Hi Andrew,
I will try again.
The problem is that in boot mode, I cannot ping the tftp server from the
router and vice-versa. What can I do?
Please advise.
Thank you.
Kind
That's exactly what I did. Thank you.
Kind regards,
[EMAIL PROTECTED]
>From: John Neiberger <[EMAIL PROTECTED]>
>Reply-To: John Neiberger <[EMAIL PROTECTED]>
>To: Brian <[EMAIL PROTECTED]>
>CC: [EMAIL PROTECTED]
>Subject: Re: 2514 Upgrade Problem!!
>D
lt;[EMAIL PROTECTED]>
>Reply-To: Brian <[EMAIL PROTECTED]>
>To: John Neiberger <[EMAIL PROTECTED]>
>CC: <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>
>Subject: Re: 2514 Upgrade Problem!!
>Date: Tue, 27 Mar 2001 20:45:38 -0800 (PST)
>
>the ether port is t
16 matches
Mail list logo