On Saturday 08 December 2018 21:10:13 John Hasler wrote:
> If you want to move on from REXX look at Tcl.
Linuxcnc uses a bunch of that in its gui's, which it has several flavors
of,
--
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and am
On Sun, 9 Dec 2018, at 01:47, Gene Heskett wrote:
> On Saturday 08 December 2018 17:53:01 Jeremy Nicoll wrote:
> [...]
> > The pid was there so that when writing and testing the script
> > I could tell which was which in taskmanager, which saw them
> > all as the same thing - an instance of the scr
If you want to move on from REXX look at Tcl.
--
John Hasler
jhas...@newsguy.com
Elmwood, WI USA
On Saturday 08 December 2018 17:53:01 Jeremy Nicoll wrote:
[...]
> The pid was there so that when writing and testing the script
> I could tell which was which in taskmanager, which saw them
> all as the same thing - an instance of the script language's
> interpreter being run.
>
I can see where th
The latest Freecad version claims to have a robust undo-redo stack. I
haven't really put it to the test yet, though.
Even infinite undo does not always suffice. You may not remember
exactly when and how you went off the rails, or you may have other
reasons to want to look back. version control
On Sat 08 Dec 2018 at 15:01:11 (-0500), Gene Heskett wrote:
> Thats what I'm embarking on doing, building master from src. but the zip
> seems to be a problem, mc is unpacking it and copying to ~/src, doubling
> the 180 some megs of the zip, but with mc piping both, its watch paint
> dry slow, a
On Sat, 8 Dec 2018, at 18:59, Gene Heskett wrote:
> ... but the lack of a plainly marked, multiple step undo gets
> me into a dead end box that results in a quit w/o save every time.
I had a similar problem with a music-typesetting package under
Windows.
I guess a versioning file system (as di
On Saturday 08 December 2018 15:22:36 John Hasler wrote:
> Gene writes:
> > Thats what I'm embarking on doing, building master from src. but the
> > zip seems to be a problem
>
> That's doing it the hard way. Use git as suggested here:
>
> https://www.freecadweb.org/wiki/CompileOnUnix#Getting_the
Gene writes:
> Thats what I'm embarking on doing, building master from src. but the
> zip seems to be a problem
That's doing it the hard way. Use git as suggested here:
https://www.freecadweb.org/wiki/CompileOnUnix#Getting_the_source
It works.
--
John Hasler
jhas...@newsguy.com
Elmwood, WI U
On Saturday 08 December 2018 14:42:06 John Hasler wrote:
> Gene writes:
> > I've started to do something in freecad several times, I don't have
> > it here anymore, but the lack of a plainly marked, multiple step
> > undo gets me into a dead end box that results in a quit w/o save
> > every time.
Gene writes:
> I've started to do something in freecad several times, I don't have it
> here anymore, but the lack of a plainly marked, multiple step undo
> gets me into a dead end box that results in a quit w/o save every
> time.
I find that undoing one action at a time almost always suffices. T
On Saturday 08 December 2018 08:38:15 John Hasler wrote:
> Gene writes:
> > LinuxCNC depends on a low latency IRQ response.
> > ...
>
> We understand all that, and I understand and agree with the "If it
> aint broke don't fix it" philosophy that leads to running "obsolete"
> computers and software
Gene writes:
> LinuxCNC depends on a low latency IRQ response.
> ...
We understand all that, and I understand and agree with the "If it aint
broke don't fix it" philosophy that leads to running "obsolete"
computers and software in machine controls. What does it have to do
with the machine you run
On Friday 07 December 2018 22:56:03 Joe Pfeiffer wrote:
> Gene Heskett writes:
> > On Friday 07 December 2018 19:54:56 John Hasler wrote:
> >> Joe writes:
> >> > ...he's still on wheezy.
> >>
> >> I wrote:
> >> > That is easily fixed.
> >>
> >> Gene writes:
> >> > Not until an rtai patched kernel
Gene Heskett writes:
> On Friday 07 December 2018 19:54:56 John Hasler wrote:
>
>> Joe writes:
>> > ...he's still on wheezy.
>>
>> I wrote:
>> > That is easily fixed.
>>
>> Gene writes:
>> > Not until an rtai patched kernel is available for the newer stuffs.
>>
>> Why would you run your CAD softw
A caveat about Freecad: weird units. Always select "Imperial", not "US
Customary" if you want to use inches. They are European and added "US
Customary" at my behest, but screwed it up (deliberately, I suspect) by
having it jump to feet and inches when you go over 12 inches and to
yards, feet, and
On Friday 07 December 2018 20:54:44 Erik Christiansen wrote:
> On 07.12.18 09:17, John Hasler wrote:
> > Gene writes:
> > > Thats a huge part of the problem, but theres another fence to
> > > jump. most of these so-called cad programs cannot generate even
> > > the most basic gcode.
> >
> > I can
On Friday 07 December 2018 19:54:56 John Hasler wrote:
> Joe writes:
> > ...he's still on wheezy.
>
> I wrote:
> > That is easily fixed.
>
> Gene writes:
> > Not until an rtai patched kernel is available for the newer stuffs.
>
> Why would you run your CAD software on your machine controller?
Why
On 07.12.18 09:17, John Hasler wrote:
> Gene writes:
> > Thats a huge part of the problem, but theres another fence to
> > jump. most of these so-called cad programs cannot generate even the
> > most basic gcode.
>
> I can see not wanting to learn even a small part of a CAD program if all
> you wa
Joe writes:
> ...he's still on wheezy.
I wrote:
> That is easily fixed.
Gene writes:
> Not until an rtai patched kernel is available for the newer stuffs.
Why would you run your CAD software on your machine controller?
--
John Hasler
jhas...@newsguy.com
Elmwood, WI USA
On Friday 07 December 2018 14:15:44 John Hasler wrote:
> Joe writes:
> > ...he's still on wheezy.
>
> That is easily fixed.
Not until an rtai patched kernel is available for the newer stuffs.
--
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury,
And except for fine tuning the locations of a couple db25 cutouts, which
I'll have to carve a test piece in wood to check and drilling a hole for
the line cord packing gland, its done.
I guess I'll have to wait, and measure for hole size when they arrive
since the mounting hole is specified as
On Fri, Dec 07, 2018 at 01:15:44PM -0600, John Hasler wrote:
> Joe writes:
> > ...he's still on wheezy.
>
> That is easily fixed.
You'd think that, unless you've read the last two years of this mailing
list.
Joe writes:
> ...he's still on wheezy.
That is easily fixed.
--
John Hasler
jhas...@newsguy.com
Elmwood, WI USA
John Hasler writes:
> Gene writes:
>> Solvespace, googling now, downloaded, will take a look.
>
> No need to download. It's in Debian.
Note that he isn't likely to find anything remotely up to date in a
repository, as he's still on wheezy.
Gene writes:
> Thats a huge part of the problem, but theres another fence to
> jump. most of these so-called cad programs cannot generate even the
> most basic gcode.
I can see not wanting to learn even a small part of a CAD program if all
you want to do is draw a simple floor plan and then never
> Something like that might be easier to get to grips with. A /big/
> advantage of using scripts is that one gets to place comments in
> the script explaining what's going on, why one did something in a
> particular way etc.
Both Solvespace and Freecad allow comments. Both support 2D
drawing.
On 12/7/18 2:45 PM, Gene Heskett wrote:
> All very encouraging. But in about 4 hours, I've written and tested about
> 90 LOC which is about 75% of what I need to have this do. :) So I think
> I'll continue on this path. :)
There's always more than one way to scratch an itch... ;-)
> Thank you
On Friday 07 December 2018 04:27:23 hdv@gmail wrote:
> On 12/7/18 1:46 AM, Gene Heskett wrote:
> > On Thursday 06 December 2018 17:48:21 hdv@gmail wrote:
> >> On 12/6/18 11:31 PM, Gene Heskett wrote:
> >>> Greetings all;
> >>>
> >>> The libr
On Friday 07 December 2018 01:39:35 Jeremy Nicoll wrote:
> On Thu, 6 Dec 2018, at 22:32, Gene Heskett wrote:
> > Or is there an even better 2d app for such?
>
> There was a discussion here starting in Nov 2017, entitled
>
>"software to do drawings of houses, gardens, etc."
>
> where several pe
On 12/7/18 10:50 AM, Joe wrote:
> On Thu, 6 Dec 2018 19:46:42 -0500
> Gene Heskett wrote:
>
>> On Thursday 06 December 2018 17:48:21 hdv@gmail wrote:
>>
>
>>>
>>> Some time ago I tried LibreCAD as well and soon had to conclude
>>> there were
On Thu, 6 Dec 2018 19:46:42 -0500
Gene Heskett wrote:
> On Thursday 06 December 2018 17:48:21 hdv@gmail wrote:
>
> >
> > Some time ago I tried LibreCAD as well and soon had to conclude
> > there were too many issues with it to proceed. Meanwhile I've
> > adop
On 12/7/18 1:46 AM, Gene Heskett wrote:
> On Thursday 06 December 2018 17:48:21 hdv@gmail wrote:
>
>> On 12/6/18 11:31 PM, Gene Heskett wrote:
>>> Greetings all;
>>>
>>> The librecad in the debian repos for wheezy is nearly a decade old,
>>> v-1
On Thu, 6 Dec 2018, at 22:32, Gene Heskett wrote:
> Or is there an even better 2d app for such?
There was a discussion here starting in Nov 2017, entitled
"software to do drawings of houses, gardens, etc."
where several people bemoaned the difficulty they had in getting
any GUI-based CAD pro
John Hasler writes:
> Have you looked at Freecad and Solvespace?
Note freecad is 3D, and his needs are apparently 2D.
Though I will relate that my (brief) acquaintance with freecad led me to
decide to just write Python scripts using python-occ to generate my
models.
On Thursday 06 December 2018 21:24:30 John Hasler wrote:
> Gene writes:
> > Solvespace, googling now, downloaded, will take a look.
>
> No need to download. It's in Debian.
Apparently not for wheezy. Nor for jessie on armhf. I'vr got a stretch on
arm64 I'll check. But I haven't logged in from
On Thursday 06 December 2018 20:41:43 John Hasler wrote:
> Have you looked at Freecad and Solvespace?
solvespace won't build here, git error maybe? I'll try some more in the
morning.
Thanks John.
--
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot,
Gene writes:
> Solvespace, googling now, downloaded, will take a look.
No need to download. It's in Debian.
--
John Hasler
jhas...@newsguy.com
Elmwood, WI USA
On Thursday 06 December 2018 20:41:43 John Hasler wrote:
> Have you looked at Freecad and Solvespace?
Freecad I have, a bit too complex for me.
Solvespace, googling now, downloaded, will take a look.
Thanks for the hint.
Take Care John Hasler
--
Cheers, Gene Heskett
--
"There are four boxes
dont have it you have to hack
> > it.
> >
> > On 2018-12-06 17:48, hdv@gmail wrote:
> >> On 12/6/18 11:31 PM, Gene Heskett wrote:
> >>> Greetings all;
> >>>
> >>> The librecad in the debian repos for wheezy is nearly a decade
> >
On Thursday 06 December 2018 19:11:03 Yves wrote:
> i suggest you to crack windows 10 and dowload autodesk autocad trial
> 30 day and then crack it too its pretty much an easy thing to do for
> everybody. Sometime free sofware just dont have it you have to hack
> it.
>
Thanks, but no windows allow
Have you looked at Freecad and Solvespace?
--
John Hasler
jhas...@newsguy.com
Elmwood, WI USA
/18 11:31 PM, Gene Heskett wrote:
Greetings all;
The librecad in the debian repos for wheezy is nearly a decade old,
v-1.02. There are V2-* stuff that still runs on QT4 some of which is
already installed.
Is there a repo where I can source a newer version than 1.02 without
destroying my system
On Thursday 06 December 2018 17:48:21 hdv@gmail wrote:
> On 12/6/18 11:31 PM, Gene Heskett wrote:
> > Greetings all;
> >
> > The librecad in the debian repos for wheezy is nearly a decade old,
> > v-1.02. There are V2-* stuff that still runs on QT4 some of whi
On 12/6/18 11:31 PM, Gene Heskett wrote:
> Greetings all;
>
> The librecad in the debian repos for wheezy is nearly a decade old,
> v-1.02. There are V2-* stuff that still runs on QT4 some of which is
> already installed.
>
> Is there a repo where I can source a newer vers
Greetings all;
The librecad in the debian repos for wheezy is nearly a decade old,
v-1.02. There are V2-* stuff that still runs on QT4 some of which is
already installed.
Is there a repo where I can source a newer version than 1.02 without
destroying my system?
1.02 is so old the u-tube tuts
On Thursday 09 June 2016 18:05:02 Lisi Reisz wrote:
> On Thursday 09 June 2016 23:01:16 Gene Heskett wrote:
> > org.kde.kcalc-6112
>
> Probably absolutely irrelevant - but why have you got kde-anything??
> (For general info, Gene is running TDE 14, not kde.)
>
> Lisi
That particular kcalc is an
On Thursday 09 June 2016 23:01:16 Gene Heskett wrote:
> org.kde.kcalc-6112
Probably absolutely irrelevant - but why have you got kde-anything?? (For
general info, Gene is running TDE 14, not kde.)
Lisi
On Thursday 09 June 2016 16:33:45 Jörg-Volker Peetz wrote:
> Gene Heskett wrote on 06/09/16 17:59:
> > On Thursday 09 June 2016 05:39:08 Jörg-Volker Peetz wrote:
> >> Yeah, you got a lot of stuff here ;-)
> >>
> >> The repositories all got the same priority 500 besides the
> >> wheezy-backports i3
Gene Heskett wrote on 06/09/16 17:59:
> On Thursday 09 June 2016 05:39:08 Jörg-Volker Peetz wrote:
>
>> Yeah, you got a lot of stuff here ;-)
>>
>> The repositories all got the same priority 500 besides the
>> wheezy-backports i386 target release which is set to priority 100.
>> These priorities a
On Thursday 09 June 2016 05:39:08 Jörg-Volker Peetz wrote:
> Yeah, you got a lot of stuff here ;-)
>
> The repositories all got the same priority 500 besides the
> wheezy-backports i386 target release which is set to priority 100.
> These priorities are normally set in /etc/apt/preferences. What i
Yeah, you got a lot of stuff here ;-)
The repositories all got the same priority 500 besides the wheezy-backports i386
target release which is set to priority 100. These priorities are normally set
in /etc/apt/preferences. What is the contents of this file on your system?
The easiest to try for y
On Wednesday 08 June 2016 02:41:02 Jörg-Volker Peetz wrote:
> Maybe, the priority of the package repositories for , e.g., package
> "libsoqt4-20" is wrong.
>
> Let's see what's the outcome of
>
> apt-cache policy
Rather lengthy, wordwrap off:
root@coyote:/home/gene# apt-cache policy
Package fi
Maybe, the priority of the package repositories for , e.g., package
"libsoqt4-20" is wrong.
Let's see what's the outcome of
apt-cache policy
?
Regards,
jvp.
On Tuesday 07 June 2016 11:10:19 Curt wrote:
> On 2016-06-07, Gene Heskett wrote:
> >> Installing (in simulation mode because it pulls in an enormous
> >> amount of stuff) freecad and freecad-docs in Wheezy LTS from Wheezy
> >> backports works for me (why qt4-dev-tools?) using apt-get.
> >>
> >>
On 2016-06-07, Gene Heskett wrote:
>>
>> Installing (in simulation mode because it pulls in an enormous
>> amount of stuff) freecad and freecad-docs in Wheezy LTS from Wheezy
>> backports works for me (why qt4-dev-tools?) using apt-get.
>>
>> Viz
>>
>> apt-get -s -t wheezy-backports install freeca
On Tuesday 07 June 2016 04:11:43 Curt wrote:
> On 2016-06-06, Gene Heskett wrote:
> >> It appears to be in wheezy-backports.
> >
> > So it is, but I cannot install it, synaptic claims broken packages,
> > but I click on custom -> broken and the list is empty. And clicking
> > on fix broken pack
On 2016-06-06, Gene Heskett wrote:
>>
>> It appears to be in wheezy-backports.
>
> So it is, but I cannot install it, synaptic claims broken packages, but
> I click on custom -> broken and the list is empty. And clicking on fix
> broken packages does nothing.
>
> So synaptic seems confused, as
On Monday 06 June 2016 13:49:50 David Wright wrote:
> On Mon 06 Jun 2016 at 13:12:33 (-0400), Gene Heskett wrote:
> > On Monday 06 June 2016 11:54:12 Eduardo M KALINOWSKI wrote:
> > > On Seg, 06 Jun 2016, Gene Heskett wrote:
> > > > So the bottom line is that wheezy doesn't have a decent CAD
> > >
cad and really
> > > > > > really tried to learn it. But first I'd have to pull the sources
> > > > > > and see if I can build it to run on wheezy.
> > > > >
> > > > > It appears to be in wheezy-backports.
> > > >
>
t; > > >
> > > > It appears to be in wheezy-backports.
> > >
> > > I can't find it there. I looked with a view to pointing Gene to it if it
> > > were there.
> >
> > Perhaps we disagree on the referent of "it"!
> >
> &
t; first I'd have to pull the sources and see if I can build it to run
> > > > on wheezy.
> > >
> > > It appears to be in wheezy-backports.
> >
> > I can't find it there. I looked with a view to pointing Gene to it if it
> > were there.
>
> Perhaps we disagree on the referent of "it"!
>
> -rw-r--r-- 18824580 Jun 6 13:11
> /tmp/freecad_0.14.3702+dfsg-3~bpo70+1_i386.deb
> eb83c48f5fdd6ec7c466ac1aec516741
> /tmp/freecad_0.14.3702+dfsg-3~bpo70+1_i386.deb (md5)
>
> Cheers,
> David.
Indeed! Quotation from the subject line: Re: libreCAD, can't find
help docs (my stars).
Lisi
On Mon 06 Jun 2016 at 18:56:07 (+0100), Lisi Reisz wrote:
> On Monday 06 June 2016 18:49:50 David Wright wrote:
> > On Mon 06 Jun 2016 at 13:12:33 (-0400), Gene Heskett wrote:
> > > On Monday 06 June 2016 11:54:12 Eduardo M KALINOWSKI wrote:
> > > > On Seg, 06 Jun 2016, Gene Heskett wrote:
> > > >
On Monday 06 June 2016 18:49:50 David Wright wrote:
> On Mon 06 Jun 2016 at 13:12:33 (-0400), Gene Heskett wrote:
> > On Monday 06 June 2016 11:54:12 Eduardo M KALINOWSKI wrote:
> > > On Seg, 06 Jun 2016, Gene Heskett wrote:
> > > > So the bottom line is that wheezy doesn't have a decent CAD progra
On Mon 06 Jun 2016 at 13:12:33 (-0400), Gene Heskett wrote:
> On Monday 06 June 2016 11:54:12 Eduardo M KALINOWSKI wrote:
>
> > On Seg, 06 Jun 2016, Gene Heskett wrote:
> > > So the bottom line is that wheezy doesn't have a decent CAD program,
> > > and never will.
> >
> > I suppose that when it w
On Monday 06 June 2016 11:54:12 Eduardo M KALINOWSKI wrote:
> On Seg, 06 Jun 2016, Gene Heskett wrote:
> > On Monday 06 June 2016 09:12:46 Eduardo M KALINOWSKI wrote:
> >> On Dom, 05 Jun 2016, Gene Heskett wrote:
> >> > On Sunday 05 June 2016 05:59:14 Curt wrote:
> >> >> All I can find as a "pis a
On Seg, 06 Jun 2016, Gene Heskett wrote:
On Monday 06 June 2016 09:12:46 Eduardo M KALINOWSKI wrote:
On Dom, 05 Jun 2016, Gene Heskett wrote:
> On Sunday 05 June 2016 05:59:14 Curt wrote:
>> All I can find as a "pis aller" after a quick look is this:
>>
>> http://wiki.librecad.org/index.php/Libr
On Monday 06 June 2016 09:12:46 Eduardo M KALINOWSKI wrote:
> On Dom, 05 Jun 2016, Gene Heskett wrote:
> > On Sunday 05 June 2016 05:59:14 Curt wrote:
> >> All I can find as a "pis aller" after a quick look is this:
> >>
> >> http://wiki.librecad.org/index.php/LibreCAD_users_Manual
> >
> > This I
On Dom, 05 Jun 2016, Gene Heskett wrote:
On Sunday 05 June 2016 05:59:14 Curt wrote:
All I can find as a "pis aller" after a quick look is this:
http://wiki.librecad.org/index.php/LibreCAD_users_Manual
This I did find, but its for a much newer version 2.0 than what is in the
repo's. That rep
On 2016-06-05, Gene Heskett wrote:
>>
>> See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=646621
>
> Interesting. Thank you.
>
> Cheers, Gene Heskett
There's this
http://wiki.librecad.org/index.php/LibreCAD_v1_Users'_Manual
which contains the following link
http://wiki.librecad.org/index
On Sun, 5 Jun 2016 15:58:26 -0400
Gene Heskett wrote:
> On Sunday 05 June 2016 13:10:52 Joe wrote:
>
> > On Sun, 5 Jun 2016 09:17:13 + (UTC)
> >
> > Curt wrote:
> > > On 2016-06-03, Gene Heskett wrote:
> > > > Greetings all;
> > >
On Sunday 05 June 2016 13:28:48 Sven Arvidsson wrote:
> On Sun, 2016-06-05 at 18:10 +0100, Joe wrote:
> > > > libreCAD looks like a simple enough cad I could learn how to use
> > > > but it cannot find its help docs.
> > >
> > > Did you give the bu
On Sunday 05 June 2016 13:10:52 Joe wrote:
> On Sun, 5 Jun 2016 09:17:13 + (UTC)
>
> Curt wrote:
> > On 2016-06-03, Gene Heskett wrote:
> > > Greetings all;
> > >
> > > Wheezy, i386.
> > >
> > > libreCAD looks like a simple enou
On Sunday 05 June 2016 12:50:10 Curt wrote:
> On 2016-06-05, Gene Heskett wrote:
> > On Sunday 05 June 2016 05:59:14 Curt wrote:
> >> On 2016-06-05, Gene Heskett wrote:
> >> >> > libreCAD looks like a simple enough cad I could learn how to
> >&
urce, Gene. Learn how to use it then write the
> docs. Or pay a technical author to learn how to use it by trial and
> error, blood sweat and tears, and then write the docs. I know a good
> one, who would I am sure, enjoy learning how to use libreCAD, and then
> writing about it, but h
open source, Gene. Learn how to use it then write the docs. Or
> pay a technical author to learn how to use it by trial and error, blood sweat
> and tears, and then write the docs. I know a good one, who would I am sure,
> enjoy learning how to use libreCAD, and then writing about it
On Sun, 05 Jun 2016 19:28:48 +0200
Sven Arvidsson wrote:
> On Sun, 2016-06-05 at 18:10 +0100, Joe wrote:
> > > > libreCAD looks like a simple enough cad I could learn how to use
> > > > but it cannot find its help docs.
> > > Did you give the built-in
On Sun, 2016-06-05 at 18:10 +0100, Joe wrote:
> > > libreCAD looks like a simple enough cad I could learn how to use
> > > but it cannot find its help docs.
> > Did you give the built-in help system a try?
> >
> Mine (2.0.9 on sid) says, and I quote verbatim:
On Sun, 5 Jun 2016 09:17:13 + (UTC)
Curt wrote:
> On 2016-06-03, Gene Heskett wrote:
> > Greetings all;
> >
> > Wheezy, i386.
> >
> > libreCAD looks like a simple enough cad I could learn how to use
> > but it cannot find its help docs.
>
>
On 2016-06-05, Gene Heskett wrote:
> On Sunday 05 June 2016 05:59:14 Curt wrote:
>
>> On 2016-06-05, Gene Heskett wrote:
>> >> > libreCAD looks like a simple enough cad I could learn how to use
>> >> > but it cannot find its help docs.
>> >
r to learn how to use it by trial and error, blood sweat
and tears, and then write the docs. I know a good one, who would I am sure,
enjoy learning how to use libreCAD, and then writing about it, but has to
earn his bread and butter, and already spends a lot of his time on Open
Source projects.
On Sunday 05 June 2016 05:59:14 Curt wrote:
> On 2016-06-05, Gene Heskett wrote:
> >> > libreCAD looks like a simple enough cad I could learn how to use
> >> > but it cannot find its help docs.
> >>
> >> Did you give the built-in help system a try?
On 2016-06-05, Gene Heskett wrote:
>> >
>> > libreCAD looks like a simple enough cad I could learn how to use but
>> > it cannot find its help docs.
>>
>> Did you give the built-in help system a try?
>>
> That is what it is reporting that it cannot
On Sunday 05 June 2016 05:17:13 Curt wrote:
> On 2016-06-03, Gene Heskett wrote:
> > Greetings all;
> >
> > Wheezy, i386.
> >
> > libreCAD looks like a simple enough cad I could learn how to use but
> > it cannot find its help docs.
>
> Did you give t
On 2016-06-03, Gene Heskett wrote:
> Greetings all;
>
> Wheezy, i386.
>
> libreCAD looks like a simple enough cad I could learn how to use but it
> cannot find its help docs.
Did you give the built-in help system a try?
> I do not see a separate docs package in the repo&#x
On Friday 03 June 2016 10:51:15 Joe wrote:
> On Fri, 3 Jun 2016 07:36:24 -0400
>
> Gene Heskett wrote:
> > On Friday 03 June 2016 07:03:54 Lisi Reisz wrote:
> > > On Friday 03 June 2016 10:59:53 Gene Heskett wrote:
> > > > Greetings all;
> > > >
On Fri, 3 Jun 2016 07:36:24 -0400
Gene Heskett wrote:
> On Friday 03 June 2016 07:03:54 Lisi Reisz wrote:
>
> > On Friday 03 June 2016 10:59:53 Gene Heskett wrote:
> > > Greetings all;
> > >
> > > Wheezy, i386.
> > >
> > > libreCA
On Friday 03 June 2016 07:03:54 Lisi Reisz wrote:
> On Friday 03 June 2016 10:59:53 Gene Heskett wrote:
> > Greetings all;
> >
> > Wheezy, i386.
> >
> > libreCAD looks like a simple enough cad I could learn how to use but
> > it cannot find its help doc
On Friday 03 June 2016 06:43:23 to...@tuxteam.de wrote:
> On Fri, Jun 03, 2016 at 05:59:53AM -0400, Gene Heskett wrote:
> > Greetings all;
> >
> > Wheezy, i386.
> >
> > libreCAD looks like a simple enough cad I could learn how to use but
> > it cannot fin
On Friday 03 June 2016 10:59:53 Gene Heskett wrote:
> Greetings all;
>
> Wheezy, i386.
>
> libreCAD looks like a simple enough cad I could learn how to use but it
> cannot find its help docs.
>
> I do not see a separate docs package in the repo's.
>
> Does any
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, Jun 03, 2016 at 05:59:53AM -0400, Gene Heskett wrote:
> Greetings all;
>
> Wheezy, i386.
>
> libreCAD looks like a simple enough cad I could learn how to use but it
> cannot find its help docs.
>
> I do not see a
Greetings all;
Wheezy, i386.
libreCAD looks like a simple enough cad I could learn how to use but it
cannot find its help docs.
I do not see a separate docs package in the repo's.
Does anyone have a clue where they might be found?
Thanks all.
Cheers, Gene Heskett
--
"There are
Andrei POPESCU wrote:
>On Mi, 10 dec 14, 00:51:16, Tad Bak wrote:
>> Hi,
>>
>> The subject says all: after issuing the command:
>>
>> apt-get install librecad
>>
[...]
>
> Works here (i386). Did you 'apt-get update' recently?
>
> Kind r
On Mi, 10 dec 14, 00:51:16, Tad Bak wrote:
> Hi,
>
> The subject says all: after issuing the command:
>
> apt-get install librecad
>
> I am getting:
> [...]
> The following packages have unmet dependencies:
> librecad : Depends: libqt4-help (>= 4:4.5.3) but i
Hi,
The subject says all: after issuing the command:
apt-get install librecad
I am getting:
[...]
The following packages have unmet dependencies:
librecad : Depends: libqt4-help (>= 4:4.5.3) but it is not going to be
installed
Depends: libqt4-qt3support (>= 4:4.5.3) but it
On Fri, Nov 01, 2013 at 04:04:52PM -0700, peasth...@shaw.ca wrote:
> Is anyone using LibreCAD? Here it is 1.0.2 in Wheezy.
>
> Edit > Current drawing preferences > units is set to mm.
> Regardless of the setting in Current drawing preferences > grid
> the snap grid is 10
Is anyone using LibreCAD? Here it is 1.0.2 in Wheezy.
Edit > Current drawing preferences > units is set to mm.
Regardless of the setting in Current drawing preferences > grid
the snap grid is 10 mm. No evidence of the problem in the
youtube tutorials and it appears to be a bug in t
97 matches
Mail list logo
