On 11/14/18 20:28 PM, Wayne Burdick wrote:
> Anyone try FT8 on their AX1 whip yet?
No FT8 yet, but I did try WSPR as one of the first uses of my AX-1.
On 10/25/18 10:36 AM, Steve Sergeant wrote:
> I received my AX-1 yesterday.
>
> This morning, I took a 30 min. break at a local park with my KX2,
I've been meaning to try pairing the KX2 and AX1 with a notebook computer to
try FT8 from the field. But hiking is all but out of the question right now in
northern California due to the fires.
Anyone try FT8 on their AX1 whip yet?
73,
Wayne
N6KR
_
Norm, there’s lots of us out here with a K1 and KX1 that still use them!! N7EDK
Sent from my iPad
> On Nov 13, 2018, at 10:14 PM, Norm Lee wrote:
>
> Reading through all the posts on this list, it just occurred to me - am I the
> last person on earth to be running a K1?
> Norm vk5gi
> McLaren
This set up has been working without problems for several weeks. Then CAT
connection problems began. Audio is received and decoded, the K3/0 can
control the radio, however When WSJT is started, the familiar ³Rig Control
error² dialog box appears. In the Settings Menu under Radio, It does NOT
pass
Good techs don’t come cheap, either, which increases overhead and inflates
prices. Patience works to everyone’s benefit.
Kent K9ZTV
> On Nov 14, 2018, at 7:38 PM, Don Wilhelm wrote:
>
> The current stated turnaround time for Elecraft repairs is 3 to 4 weeks.
> Given the staff techs with ex
Seems about right. My K3 arrived in Watsonville on Oct 1, and was shipped back
exactly 30 days later.
That said, it was the first time my nearly 10-year-old K3 had been back to the
factory and the first actual problem of any kind I’d had with it. At the same
time, they installed the front pan
I don't remember any brand doing it much better...
Chuck KE9UW
c-haw...@illinois.edu
Sent from my iPad
> On Nov 14, 2018, at 6:39 PM, Don Wilhelm wrote:
>
> The current stated turnaround time for Elecraft repairs is 3 to 4 weeks.
> Given the staff techs with experience, that is the best that t
The biggest repair queue delay we get this time of year is when we receive an
unexpected block of lightning damaged radios. That usually adds a couple of
weeks to the repair queue. (We can easily determine where the lightning
activity is around the country from the return addresses..)
Don't
Pete et al:
I purchased my K3S 100-F in August of 2015. I experienced a failure
in the form of distorted SSB audio in April 2018. Working with the
techs at Elecraft they suggested and supplied a new KPA3A. That unit
was received and installed and failed within a week. They then
sugges
Please contact me direct with an offer if you are interested in any of
these K3 parts.
2.7k Filter
--
KXV3-2 Rev A board
The next three go together:
--
KIO3 REMOTE I/O REV B
KIO3 AUDIO IO MODULE REV XD
KIO3 MAIN REV
The current stated turnaround time for Elecraft repairs is 3 to 4 weeks.
Given the staff techs with experience, that is the best that they can
do. Oh, yes, "hire more techs" can be said, but that takes time away
from those techs now working on repairs for training of new people, so
initially t
I think it is possible that those who are happy with Elecraft legendary
support are the same people that have realistic expectations.
Marv
KG7V
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Peter Dougherty (W2IRT)
Sent: Wednesday, November 14, 2018 2:14 PM
To: g.
Well here we are two weeks later. The radio's been sitting in the repair
queue since Nov. 1st and hasn't even been looked at yet according to the
phone call I just placed. Still waiting to experience that legendary
Elecraft support that everybody here raves about. To have a radio that I
went four y
Good morning all,
Skip to the last paragraph to get the question.
I operate almost exclusively on CW with a KX3 and K2 that I built in 2004.
I have the audio from two computers and both radios run to a small Xenyx
502 mixer , then to a small stereo amp and a nice pair of speakers. I
seldom use t
Tom,
I was told that. All I can say is that there is no delay from the K3S when I
transmit on WSJT-X. I increased the delay to .3 seconds under ADVANCED in
WSJT-X settings and the problem is solved.
73,
John
WA!EAZ
> On Nov 13, 2018, at 11:12 PM, Tom wrote:
>
> Hi,
> WSJT-X does not touch
15 matches
Mail list logo