Just curious: with mentions of other upcoming Elecraft products (e.g.,
power amps) in previous posts, is there a chance that Elecraft might
release a General Coverage receiver "kit" someday? I am wanting
something comparable to the Palstar r30, Icom r-75, etc., but would
much rather build an E
I already have an Elecraft GC receiver.. my KX1...
and smaller than my last SWL kit. a Heathkit GR-64 circa 1965. :)
Frank. K2PQ
-- Original message --
From: [EMAIL PROTECTED]
> With the large number of "give-away priced" 2 meter "rice boxes" I can't
> im
> I would like Elecraft to come out with [...]:
>
> 1. Yes, a general coverage receiver. But 0-60MHz and AM/SSB/CW/FM.
> [...]
> And price it at $500.00, which would be a reasonable price. It could even
> be designed to use the same DSP and computer I/O as the K2.
A smart idea. I would buy one
With the large number of "give-away priced" 2 meter "rice boxes" I can't
imagine why Elecraft would want to devote its resources to such a project. The
same is true of SWL receivers. I have a Radio Shack all band AM/SSB/CW receiver
that I recall cost me about $150.00. Admittedly it doesn't have
I would like Elecraft to come out with two kits that Ten-Tec seems to want
to languish or discontinue:
1. Yes, a general coverage receiver. But 0-60MHz and AM/SSB/CW/FM.
Shortwave is still active and there are still many utility stations to tune
in, including RTTY. And the receiver has to have
On Tuesday 01 August 2006 22:13, David Toepfer wrote:
> Ham-band-only receivers in
> general are more stable, precise, quiet, simple, and affordable and a
> comparably designed GC RX.
Isn't it telling that the Ten-Tec Orion II has
two separate receivers, one amateur bands only and
the other gen
This conversation has coincided with some decisions I have been making
radio-wise lately, FWIW.
Also being a member of the AM/Boatanchor croud, there always seems to be a big
push to get GC receivers. But I was listening to a friend recently on the air
who has owned an R-390A for years (arguably
In a message dated 8/1/06 12:32:30 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
> -Original Message-
> Jim replies (>) to my original message (>>) ...
>
> >> - Medium size or larger controls.
>
> >How big is that? To me, "medium size" means 1" diameter
> > for most controls and
Keith KD1E wrote:
Well, I don't know enough to discuss this but it sure seems to me that
someone could come up with an R-4B style design using modern parts that
would be easy to build and pretty cheap. Well, you'd think it would be
at least. After all that rig was nothing more than a receiver t
-Original Message-
Jim replies (>) to my original message (>>) ...
>> - Medium size or larger controls.
>How big is that? To me, "medium size" means 1" diameter
> for most controls and 2-3" for tuning.
Yep, sounds sweet to me.
> The problem is that there's a conflict between that
>
Keith,
I am a bit surprised with Your 1kHz display resolution requirement > its not
too much, no? K2 has 10Hz tuning resolution...
72, Petr OK1RP
> Původní zpráva
> Od: Darwin, Keith <[EMAIL PROTECTED]>
> Předmět: [Elecraft] Elecraft GC
In a message dated 7/31/06 3:25:23 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
> We all want a K2-B (K2 with big knobs & display) and I'm sure Elecraft
> Engineering is working on it as we speak.
Well, some of us want one (I suggest the name K2Big). But I don't know that
the folks in
-Original Message-
From: David Toepfer
> I want a separate receiver in the shack.
> [...]
> - Low cost ($300)
Man, you are funny.
Yea, but looks aren't everything :-)
If Elecraft can build a transceiver for less than $300 that gives RX
coverage from 6 to 16 MHz
How about a Kenwood TH-F6A? It fits your price point, has CW and SSB
coverage, and receives 0.1-1300MHz, and supports RS232 control so you
can use it for your computer control. Plus when you aren't using it as
a station monitor, you can use it on 2/1.25/70cm TX.
73,
Leigh/WA5ZNU
On Mon, 31 Ju
> I want a separate receiver in the shack.
> [...]
> - Low cost ($300)
Man, you are funny.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http:/
We all want a K2-B (K2 with big knobs & display) and I'm sure Elecraft
Engineering is working on it as we speak.
So how about another idea. I want a separate receiver in the shack.
Something to use as a backup. Something I can use to monitor my the TX
signal from my K2 so I can hear what it is
16 matches
Mail list logo