Andy,
I've never seen such a grinding wheel around here. Can you please tell
me about who is supplying these, and for which purpose?
Peter
Am 22.03.2013 17:18, schrieb andy pugh:
> On 22 March 2013 15:56, Gene Heskett wrote:
>
>> I have been threatening to make me one of those disks and buy a
Hi all
I have found that Rot4thaxiskins - "configuration of a 3 axis machine
with an additional rotatory axis" has been added to LinuxCNC 2.5.2 ,is
this correct? If Rot4thaxiskins has been added has anyone tried to use
it?
Have a look at my brothers web page, http://members.shaw.ca/rpape/
There i
hello
i'm an italian new user of EMC2
excuse my bad english
can i use the function 3PWM included in 5i23 SVTP6_7I39 firmware file
with a 7i43 board?
or better
is it difficult make a firmware file which can drive 3PWM in a 7i43 board?
the 7i39 board is a good board but is expensive with cost and pi
On 23 March 2013 20:08, Roberto Sassoli wrote:
> can i use the function 3PWM included in 5i23 SVTP6_7I39 firmware file
> with a 7i43 board?
> or better
> is it difficult make a firmware file which can drive 3PWM in a 7i43 board?
The firmware file does exist, I have even used it. But I can't see
I've fixed and potrace'd to an eps file that looks ok when imported into
gimp, of the handle outline of the cocking piece in a BP rifle. I was
under the impression that we had something that could take this .eps file
and make gcode out of it, but I'll be dipped if I can recall its name.
Can an
For going from EPS to gcode I use PyCAM. Bit of a learning curve, couple of
wrinkles, but works well once you get past that.
Gene Heskett wrote:
>I've fixed and potrace'd to an eps file that looks ok when imported
>into
>gimp, of the handle outline of the cocking piece in a BP rifle. I was
On Sat, 2013-03-23 at 17:36 -0400, Gene Heskett wrote:
> I've fixed and potrace'd to an eps file that looks ok when imported into
> gimp, of the handle outline of the cocking piece in a BP rifle. I was
> under the impression that we had something that could take this .eps file
> and make gcode
On Sat, Mar 23, 2013 at 5:36 PM, Gene Heskett wrote:
> I've fixed and potrace'd to an eps file that looks ok when imported into
> gimp, of the handle outline of the cocking piece in a BP rifle. I was
> under the impression that we had something that could take this .eps file
> and make gcode out
On 23 March 2013 21:36, Gene Heskett wrote:
> I've fixed and potrace'd to an eps file that looks ok when imported into
> gimp, of the handle outline of the cocking piece in a BP rifle. I was
> under the impression that we had something that could take this .eps file
> and make gcode out of it, bu
I was looking at Gcodetools for inkscape last night.
Its actively supported by Nick off the russian forums. I was looking to
import an HPGL file to eps through inkscape and out with gcodetools. I am
not there yet but moving along.
The wiki discusses gcodetools v1.2 . Its already upto v1.7 maki
On Saturday 23 March 2013 20:59:56 Sebastian Kuzminsky did opine:
> For going from EPS to gcode I use PyCAM. Bit of a learning curve,
> couple of wrinkles, but works well once you get past that.
More than my 78 YO face. :)
Well, I /think/ I had it doing what it was supposed to do since it deman
On Saturday 23 March 2013 21:07:48 Lawrence Glaister did opine:
> On Sat, 2013-03-23 at 17:36 -0400, Gene Heskett wrote:
> > I've fixed and potrace'd to an eps file that looks ok when imported
> > into gimp, of the handle outline of the cocking piece in a BP rifle.
> > I was under the impression
On 3/23/2013 8:56 PM, BRIAN GLACKIN wrote:
> The wiki discusses gcodetools v1.2 . Its already upto v1.7 making the wiki
> out of date.
The Wiki is out of date on many topics related to CAD/CAM :-(
>My plan is to figure it out then see what I can do about
> updating the wiki. Gotta figure it
On Saturday 23 March 2013 21:14:32 Lawrence Glaister did opine:
> On Sat, 2013-03-23 at 17:36 -0400, Gene Heskett wrote:
> > I've fixed and potrace'd to an eps file that looks ok when imported
> > into gimp, of the handle outline of the cocking piece in a BP rifle.
> > I was under the impression
On Saturday 23 March 2013 21:39:26 Przemek Klosowski did opine:
> On Sat, Mar 23, 2013 at 5:36 PM, Gene Heskett wrote:
> > I've fixed and potrace'd to an eps file that looks ok when imported
> > into gimp, of the handle outline of the cocking piece in a BP rifle.
> > I was under the impression t
On 03/23/2013 09:51 PM, Gene Heskett wrote:
> All of these seem to need way more memory to work without an OOM tummy
> ache, on either the mill with 2G dram, or on this box with 4G dram. PyCAM
> just took an OOM exit after running this machine 850 megs into swap, so
> this box is crawling on its b
Compilation video of bad things happening to CNC machines, ends with a person
doing something that's just flat out stupid.
https://www.youtube.com/watch?v=G5uQEmiux0E
--
Everyone hates slow websites. So do we.
Make your
17 matches
Mail list logo