Hi,
Here is something I had up and running with my freevo-1.3.2-pre4, I haven't
ported it to the latest release yet (but the maintainer of "idlebar.py"
might be interested of doing that ?).
Good luck!
1) You need to make sure that your DIR_RECORD path is set and add the
following lines to your "
Thanks for the info. I'm running Debian and use the
"full binary release" of Freevo.
I read at the installation section in Freevo web page
for Debian that "a binary of Freevo itself will not be
available until the next major release of Freevo." is
that still valid and what exactly does it mean for
I dont know if this helps any...
everything in lirc works until I start freevo.
freevo does not respond to any of the remote's events.
exit freevo and try irw again, I sucessfully see the remote's output events.
Checking my /etc/freevo/lircrc it does match the button names in my
/etc/lircd.conf
w
Hi,
I know that the setup is from freevo.conf. But for some reason it does not work with
Freevo 1.3.4 but it does work with Freevo 1.3.2.
-Teemu-
- Alkuperäinen viesti -
Lähettäjä: Dirk Meyer <[EMAIL PROTECTED]>
Päivämäärä: Keskiviikko, Elokuu 20, 2003 11:29 am
Otsikko: [Freevo-users] R
Ugh, how I hate sourceforge CVS lately :) I have been trying to get the
latest CVS version of freevo and I get until
cvs server: Updating freevo/video
and then it hangs and hangs This has happened for the last couple
of days. Is this a problem with sourceforge or is there some lock
sitt
Ok anyone have a guide to setting up lirce that is better than the install
instructions?
the lircrc file the freevo/helpers perl script creates contradicts the lirc
documentation.
does anyone have a working lircrc file that they are willing toshare so I
can figure this out? lirc likes my remote.
hmm.. have you followed the instructions of dxr3 setup (not the one in
freevo)?
do you have the devices for the dxr3 card?
cd em8300;cd modules;make devices
or something like that..
- Original Message -
From: "Mark Benson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, Aug
I've been following the docs and have patched SDL, but still no joy - I've
posted a couple of replys already but they don't seem to be getting thru.
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 20, 2003 11:48 AM
Subject: Re: Fw: [Freevo-us
Ok not 100% sure about this but I've just tried playing an mpeg 1 file thru
mplayer on a remote shell (not sure if doing it this way will work but I
can't see why not - even though I can't physically see the output :-).
tried mplayer -vo dxr3 -ao oss://em8300_ma-0 test.mpg
and mplayer -vo dxr3 te
You can read the thread on the webpage.. but i'll past my reply to the
thread, my guess is
that this will fix your problem..
fb=FrameBuffer
dxr3 is a mpeg-card
"I have another solution to your problem i think... dont really know if your
problem
was the same as mine, but i only saw 50% of the mov
It have come thru, and I have already answered it ;)
If you want you can join #freevo on irc.gnu.org. I (^Y0da^) can try to help
you there
(will be faster that way ;)
I'll be there in an hour or so..
tyyl
- Original Message -
From: "Mark Benson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTE
Sorry, i know what is DXR3 ;)
Johan Celén a écrit :
>
> Do you run freevo in x?
> or fb, dxr3.. etc? ;)
>
> If it's in X it's already covered in the mailinglist.
> Read "My fullscreen sucess story..." thread that was started yesterday...
>
--
Feulvarc'h Mathieu +(33)01 34 81 61 22
Administrat
Hi,
yesterday, I've tried to get freevo working on my TV. I am using freevo in framebuffer
mode with resolution 640 x 480. So far so good.
Then, I have switched to the TV using
nvtv -r 640,480 -s Small -t
now, I saw the console on the LCD and on the TV. (I wondered about this, cause the
Hopefully your card will work when you try it with mplayer :)
Seems like you have setup everything right. You might want to run
em8300setup -d btw,
then you'll be able to get both ac3 and pcm sound. I get the flicker on the
tv everytime I reboot /
reinitialize the card, so that's normal.
You should
(My posts don't seem to be getting thru - trying again)
- Original Message -
From: "Mark Benson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 20, 2003 12:37 PM
Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream
not system stream...
> Thanks
On Wed, Aug 20, 2003 at 12:20:10PM +0200, Jortan H wrote:
> I will try more later when I get home. But I'm sure
> that I have /usr/bin/python symlinked to python2.3.
>
> I've written python scripts and can run them in python
> shell (or whatever it's called) and sys.version
> returns 2.3.0 but wh
Johan Celén a écrit :
>
> Do you run freevo in x?
> or fb, dxr3.. etc? ;)
>
> If it's in X it's already covered in the mailinglist.
> Read "My fullscreen sucess story..." thread that was started yesterday...
>
I launch startx so that i'm under KDE and after i launch freevo so i'm
under X.
Can y
Thanks Johan,
I haven't tried running it with mplayer as yet, as I was trying to work thru
everything systematically. I will try mplayer when I'm actually infront of
the box next. I was wondering if the mpeg should be a specific format for
the dxr3, maybe it can only scale divisions of PAL resolut
Do you run freevo in x?
or fb, dxr3.. etc? ;)
If it's in X it's already covered in the mailinglist.
Read "My fullscreen sucess story..." thread that was started yesterday...
- Original Message -
From: "Mathieu Feulvarc'h" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, Augu
Another note, theres instructions somewhere on the freevo website, you need to
manually patch SDL to get freevo to output on a DXR3. When I get some time I
plan to make a similiar patch for a DXR2 :)
Ben.
Quoting Mark Benson <[EMAIL PROTECTED]>:
> Hi all,
>
> I'm still having problems getting
I will try more later when I get home. But I'm sure
that I have /usr/bin/python symlinked to python2.3.
I've written python scripts and can run them in python
shell (or whatever it's called) and sys.version
returns 2.3.0 but when I add sys.version to code
runned by Freevo it says 2.2.2 (or someth
Hello all.
I just install freevo via rpm (last version download from official
website) and it work fine after a freevo setup.
But, one problem: i can not go fullscreen. When i type freevo, it start
in half-size with possibility to move the windows but when i ask full
move (with the key written in
Hi, I have had a DXR2 setup in linux using mplayer in the past and have some
knowledge of mpeg encoding/mplexing.
Mybe the device /dev/em8300_mv expects a 'system stream', have you tried
cat test.mpg > /dev/em8300_mv
??
Is there any other DXR3 device handles ?, mybe another one will accept a vi
Yeah.. I have a working dxr3 (hollywood+) in my freevo box..
I've got the same error that you have.. but all I had to do is to reboot,
and then it worked.
what do you get if you run em8300setup -q ? Does everything looks ok?
have you tried to run the card with mplayer (without freevo)
mplayer -vo d
> thats very odd, if it happened as soon as u turned ur pc on, id
> say hardware
> clitch, if its happening at boot time *some* sort of software/firware is
> activating the bttv audio, id guess anyway.
It seems to start after you first start recording from /dev/dsp, way after
the modules are insta
Hi all,
I'm still having problems getting my dxr3 working with freevo,
The old post is what happens when I try to output an mpeg to the card...
When I run freevo with dxr3 set as the output, freevo complains that there
is no output device...
Anyone with a working dxr3 have any ideas?
- Ori
Guido Zockoll wrote:
> I am new user of freevo, or should i say i'd like to be a new user.
>
> When i start ./freevo_xwin 0 0 800 600 i get a black rectangle and on
> the console there is a small text "0x0081" - nothing more.
That's correct
> Can anyone give me a hint whats going wrong?
You
teemu ahola wrote:
> Hi,
>
> So far I have managed to found out that the screen goes blanc because of the line
> 340 on file osd.py. There is following line:
>
> self.screen = pygame.display.set_mode((self.width, self.height), self.hw, self.depth)
>
> For some reason this causes the screen go to a
Freevo will use whichever python is named /usr/bin/python; so if you
symlink python2.3 to python then it'll work. The thing to remember is
that you will need to make sure you have Python 2.3 versions of the
modules installed...
On Tue, Aug 19, 2003 at 11:35:47PM +0200, Jortan H wrote:
> Hi,
>
> I
29 matches
Mail list logo
